Hey Guys please help with my ESPA 3D Please .Tell me what should i use Coro or Depron.

hi,

i would suggest depron. coz it will be very light. but use stiffners

regds

If it is your first plane , then u can use coro first...
it is almost uncrashable..
also simple handling...
then onwards , u can use depron etc...

for a first plane i would recommend depron over coro

Quote from: aditya on July 17, 2011, 09:23:50 PM
If it is your first plane , then u can use coro first...
it is almost uncrashable..
also simple handling...
then onwards , u can use depron etc...

I'll go with this recommendation. +1 Chanakya / Aditya!

Exactly! Coro from me too. Like I told you in another thread, it's really easy to work with and a good quality one can take a lot of crashes.
Don't try those ad-banners from poles, buy a good quality 6*4 sheet.

Yes guys as you have recommeded i will get coro so tell me where to get good quality coro at a good price (preferably in bulk quantity) and tell me where to get (normal) landing gears

Oh finally guys after making lots of phone calls and walking miles i hv got 3mm corofoam sheets(although a bit expensive at 25 rs per feet) but yeh i hv drawn the plan on the sheet and tell me where do i get yardsticks?

Yardsticks?
Why don't you try those wooden 'beading' sticks they use for lining furnitures. They are produced in various sizes and are easily available.

 i made the same with coro, flies beautifully .managing cg is a problem if using coro, i used 4 mm coro 

Pictures ?

here's the pics .motor mounting stick broken in the last flight, didn't get time to repair

@ anwar the trex 700 put in the background intentionally 

700 = 600

It is trex 600

Quote from: santhosh on July 29, 2011, 11:42:46 AM
i made the same with coro, flies beautifully .managing cg is a problem if using coro, i used 4 mm coro 

so what are the electronics that you are using and where have you got them from please tell me.

Santhosh bhai - Please post AUW, power system (including battery used) and type of servo used.  This would help answer the question above.

here is my set up

eflite park 480 outrunner motor
prop   12*6 slow fly
esc 30 amp from rcfor all
battery- dualsky 2cell 20c 1050 mah lipo
rx_ spectrum AR 6000
servos-HXT900 from hobbyking

Guys if no one replies than i do not know what to do-
Plane-ESPA-3D
Material-3mm Coro Foam
Setup(Still Thinking)-
Brushless Motor -Turnigy Bell 4210 890 kv(HK)
ESC-25A(HK)
Battery-LiPo 2S 20C 1000 mah Turnigy(HK)
Propeller -8*6
Please tell if it is right or wrong.Thanks.
Warning Please Reply.