hi,
a new pusher plane design and built by me
test flew and was beautiful.
see pics
regds
sandeep
Great thing there! The design looks pretty simple and CLEAN. {:)} Can you please post some more pics on how you have mounted the servos and pics of internals of the fuselage would be helpful :salute:.
a decent and good plane
can u post some more pics please
Well done!.. :thumbsup:
Videos please
Clean design............. would love to know the specs...............videos too :thumbsup:
nice one sandeep. {:)}
pl provide details of the plane and the gear
what is thw auw?
pl show the video
ashta
Awsome build,
Can u share plans?
That is a great build Sandeep . Coincidently I am doing just that as well but with a 50 " wing span .
Rahul ,
Check this thread out it will give you some ready made pusher plans :
http://www.rcgroups.com/forums/showthread.php?t=1000670
You can adapt them to Coro .
rgds
sai
Hi Sai,
would like to know what setup u r using?
Sandy if u r around please share how was the experience of maiden?
I want to know is it a good trainer plane or far better from that.
what kind of skills are required for flying this bird.
I am using a astro brushless inrunner you can use a 2212/06 or 2805/2850 KV instead if it is an out runner .
Sai
hi all,
thanks for the feedback. i built this plane in the diwali vacation. the design was in my mind from quite long.
since i had access to 2mm coro, i tried it and specially opted for a pusher configuration to avoid damage to motor and prop during training.
the maiden flight was a noes dive due to upthrust. after the correction it was a beauty to fly. very gentle. i did about 2 flightts.
the specs as below
wingspan - 48"
length - 32"
Flying wt - 530gms
brushless motor - Great Planes Rimfire 28-30-750 Out-Runner Brushless
11.1v 1000mah batt.
2 micro servos
Will try to post some more info on this plane.
regds
sandeep
Sandeep Please give some specification of this plane (Plans)
so is this a glider ??? i know its an old thread
The Next step to true greatness is 'Simplicity'
Sandeep can we add ailerons ??
nice build! reminds me of the epp fpv! just a thought, why not make the nose aerodynamic? won't there be less drag?
Sent from a potato using a lamp
what prop was used may I know that
is it a trainer
Good design ... What have you used for the fuselage .. Al. Tube ?
Awesome design.
Very nice design. Simplicity at its best... :thumbsup: :thumbsup: :bow:
May i know any link where plans, design or something of this sort is given or it was your own design. Also, I hope we could install ailerons to it...
What is the prop size used for it. Also, please post videos.
:hatsoff: