Fuse bottom fixed





ESC hatch fixed

Radio Control set up

Wing cut out made in fuse; wing installed

 

Sir , from where you got Spring steel landing gears and push rods material ?

1.Landing gear: I bought spring steel wire from a spring manufacturer, and bent it myself. Reply %7 shows
2. Pushrods: Bare rods I normally use cycle spokes - up to a 25 size I use 2 mm (depends of course on the length of the rod)  In this model I used 2 mm cycle spokes for the aileron pushrods

I use commercial wire-in-tube rods too - see http://www.hobbyking.com/hobbyking/store/__13036__Control_Rod_ABS_Sleeve_1pc_bag_.html

In this model I used that for one pushrod, for the other, I had bought 1.2 mm spring steel wire, and used that with a PVC tube. This system of wire-in tube needs anchoring at several points, and is, I find, one of the best ways to make pushrods

Fuse build complete

Decorating with vinyl trim

Final Size/Specifications:

Span: 990 mm
Length: 735 mm
Wing Area: 16 dm2
AU Weight: 880 grams (with 2200 mah LiPo)
Power: 2836-1150, 9*6, 2200 mAh 3S, 40 A ESC

Maiden and video shortly

Sanjay sir is the rajnikanth of RC India 
Great build sir!

Out of the world construction Sir!!!

What we can expect from your build is Ultimate Quality; Ultra Stable Flight character & Gorgeously Gorgeous models ;-).

Alass!! I am not there to test fly this beauty!!

 

That was a fast build!
Looks amazing.

This definitely is a very nice and fun plane to fly. Regular at the airfield.

Quote from: Himadri Roy on June 17, 2015, 01:04:13 PM
Sanjay sir is the rajnikanth of RC India 
Great build sir!

Thanks 

Thanks Arvind - miss you too 

Thanks Bunty 

Fast and looks stable. .. awesome sanjay sir

Thanks Maahin  

Thanks Darshan: will come to know soon  

beautiful build sanjay sir.

Thanks very much Manoj 

  sanjay sir.another beauty . nothing can stop you from scratch building.awesome speed and detailed build log.all the very best for maiden flight.