Hi everyone,

I was able to get some time to design a plane on fusion. I am trying to fabricate the same using extruded poly styrene (XPS) , locally called insufoam, using a hotwire cutter and other tools

Technical details
airfoil : Clark y
Span : 1000mm
Chord : 166mm
Aspect ratio :1:6
Fuse : 625 mm
V tail
servo  4*9gms
Cubic wing loading : 6.65
Power plant : yet to be decided  (70-100 Watts 2210-2212, 1200-1400kv)
prop: 7045
Battery : 1500mah 3s
Stall speed : 6.6m/sec
Ps : named it after one my good friends 😅

Hot wire cutting and progress till now.

Need to buy a 6*4 mm cf hollow tube for the Spar and a motor to power the model. DYS d2822 1450 (overkill) is on my mind.

Last image is of a scaled down 1:10 3d Printed model


Should I go for the pultruded or the roll wrapped CF???

Some updates, almost complete, test flight remaining.

Ditched the idea of CF tube as it's pretty costly
Used beading wood instead. (20 rs 😅)
Power plant : dys 2822 1450kv , 3s

Finally got it in the air. It's a good flier.

https://youtube.com/shorts/MESj1pjEV_s?si=KvyVo5NLVr2-cv9U

Congratulations. Well done. Looks like a good fast flier.

@manu,

You should look up posts of Free Flight, and Gilidiator, to know who these guys are and what they represent.

It'll we worthwhile.

@free flight, Sir, thank you for the words of appreciation. @Iyer Sir, , I will definitely try to know more about them.

Congratulations on a great build and a great flight.

Thankyou, Sir.

Tried paying full justice to the design color scheme. I feel it was better before  

good build.. well done

Hey can we talk on my WhatsApp need some help 8800653973 I would really appreciate

great job bro, great build.
#bangloreflyers

Great Build!!!

Thank you everyone for the words of appreciation.