Hobbico Aerocruiser power system upgrade

Started by Sethji, April 14, 2010, 01:42:32 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Sethji

Mr. Rao, I wanted to seek your help regarding one of the planes in your Hanger. Please share your experience with this model.

Quote from: Rao on April 07, 2009, 08:37:23 PM
My Hanger:

1. Hobbico AEROCRUISER EP ARF:Hitec 4ch SC FM Rx,2-HS-55 Servos,Stock Motor 380 size,Stock ESC and 8.4V 1100 mAh Ni-mH battery.                  

I too have a 3Ch Hobbico AeroCruiser. It has the stock 380 size brushed motor, 6x3 prop, stock ESC, 2-HS-55 servos, and 8.4V 1350 mAh Ni-mH battery. The AUW is 640 gms.  However, the plane has not been able to fly... It seems that the stock motor cannot generate sufficient thrust.

Do you think, I should use larger prop (9x3, 8x4, etc) to generate thrust, or use a LiPo to reduce weight (NiMh battery pack is 175 gms), or swap the stock motor with a brushless motor+esc ?

Others are also requested to share their knowledge/expert advice. I will appreciate your inputs.

Thanks in advance :)



Electronics                             Weight (Gms)   
380 Motor (Brushed)                     83.29   
ESC + On/Off Swith                      30.00   
Standard Servo #1                       46.50   
Standard Servo #2                       45.50   
3-Channel Rx                               26.43   
8.4 V NihM Battery Pack               175.00      
TOTAL                                               406.72

Parts                
Fuselage                                    87.00   
Crowling                                     15.00   
Elevator                                     17.00   
Stabalizer                                    5.15   
Wings                                        76.00   
Battery Cover                               4.34   
Wheels (Blue)                               8.75   
6x3 Propellor                                 4.50   
Prop Saver                                   3.05   
Servo Arm #1                               6.27   
Servo Arm #2                               6.33   
TOTAL                                             233.39
               
AUW                                                640.11


Sethji

#1
Well friends... the AeroCruiser flew !
I used a 7x4 prop and inserted a freshly charged (cycle-re-cycled) battery pack... But, took extensive damage when it crash-landed... I haven't lost hope... with some fevicol, tape, and some sanding... it will fly again  :)