Matsumoto, my favourite designer, again

Span: 1330 mm
Length: 995 mm
Weight: 1600-1750 g (I've modified, and targeting 1400 g)
Wing Area: 27 dm2
Power: To be decided. Originally was a 25 Nitro. Will go with a 3536-1250 probably with a 10*7 eProp

[/url]



































[/img]

I used 2 mm lite-ply for doublers.

The main landing gear bock- I have tried to design this so the impact of landing is transmitted over the largest possible area on the fuse

The ply doublers are glued with SR 998

The butt and fillet joints are glued with hot glue

Fuse & tail feathers 4 mm

Did not have yellow 4 mm corro for tail feathers so covered with thin vinyl (it comes in different varieties)

I'm waiting on wood for spars, and some other hardware. Hopefully it will come sometime this week

We are also waiting to see it on air. Go ahead master builder.

Well Sir I am Waiting for the complete love your speed I very much get inspired from you we really wanna thank you for making these models its an education towards R/C and help for Beginners.
Thank you So much Once Again To YOU !!!

Shijin and Aman   

Oh and if you want to see a larger hi-res pic, click on the pic and it should pop up, or right click on the pic and select open in new tab

Sure Sir I will Surely Love To See THE HD pics LOVE YOU !!!!!!!!!!!!!!!!!

Checking the weight at this stage



Put the stripes on the rudder using vinyl

Making the battery hatch cover

Looking Nice!

Wow I love that that. !!

This build is going painfully slow 

Too much detail work on the topsides 

Hatch Cover done

Made some stickers on my home ink-jet printer using sticker photo-paper

Formers for balance topsides - Cockpit and Turtle Deck

The difficult part about adapting in corro from a balsa kit is you have to re-invent continuously. It's easy-ish on a normal build, the moment all the topsides, detail come in .......

Cockpit

I see you're doing the word "scale" justice. Very nice details!

 

Thanks Maahin. Not too much justice, I'm essentially an outlaw 

Ashok-ji 

@sanjayrai55,
Sir,
You have now set a new standard for coro builds 

Iyer sir: Coming from you that really means a lot!

Thank you sir