scratch built foam n basswood 24ws these wing made yesterday work in progess for fuse
k so here is the full fuse basswood every thing scratch built even wheels ,landing gear a bit weak thou ,attached only 1 servo need 2 buy another
and here is how the entire 24ws stick plane looks only the plane weighs 100grams working on electronic now
have 1300mah ,18A ESC, looking for a good motor now plane with out electro is 100grams,rest of electronics (esc,batt,servos,push rods) with out prop and motor is around 124grms,
Roman the wing and the fuse is looking beautiful. {:)}
thank u swizera, its my own plan actually just trying want it 2 be very very slow flying searching for a good motor as it is 100grams,and my electronics is around 124grams with 18A ESC and 1300mah ANY SUGGESTIONS
k got the servos attached, the entire plane with every thing prop,18A esc,rx,battery 1300mah,..etc except MOTOR the weight is now 190 - 200grams i have still not decided on the motor please advice(prop and motor) as i want it to be 24ws and very very slow flyer.
I don't see the beginning of a build here either :( Only a servo for the elevator seems to be the only thing not fixed on the very first picture itself. Did you post a half done model, which was in progress before the sweepstakes started ?
Comments ?
the day the part was made was the day the pic was taken
I am sorry if you feel your work was being discounted... that was not my intention. I really wanted people to build something (even ARF) from its beginning and take it to its maiden. If I did not stick to my self imposed rules, it would be very unfair to people who put in all the efforts to follow the instructions/rules.
If you can understand/believe it, my stand on this is also a confirmation towards the fact that we are serious about promises we make, and the rules we impose upon ourselves.
u can call both planes out of the sweep thanks