scratch built Cessna mod
wing span 36in
fuse length 32 in
made in HD thermocol
Good Docnayeem.
is it Coro made ?
No its HD 16 density foam EPS
I guess
Yes its EPS HD foam 14 kg / m 3
Looks pretty. Why not decorate it with some coloured tapes etc to give a complete cessna look...
Just a suggestion... Also, post videos of flying.
Yes video is being edited will post soon
Waiting for the video... (:|~ (:|~
Watch "Cessna mod maiden flight" on YouTube - https://www.youtube.com/watch?v=VNyjip6-r5A&feature=youtube_gdata_player
Yes utkarshg13 I should decorate it .... Time as usual ..:(
nice one {:)} {:)}
@docnayeem
Well done sir.
Consider adding some nose weight.
Regards.
@ K K Iyer sir ...
Thanks ... The model is slightly nose heavy already ... Any specific reason ? Please lemme know
Regards
Even I thought for this once. Try re balancing the CG.
Nice plane but what was the mod
mod = model as I could understand.
@docnayeem
Appears to be flying in a tail down attitude. Reason could be:
1. Tail heavy, needing forward pressure on elevator stick to prevent zooming
Or
2. Nose heavy, requiring lot of up trim and/or need to hold some back pressure on elevator stick to maintain height. If so, will nose up when speed increases.
Or
3. Needs some downthrust, ie, motor pointing 1-2 degrees downward.
Where is the CG presently? (as percentage of chord from leading edge)
The cg is 25 % of cord ...