Thanks Doc 

Girish, I have an easy way of warding off the nazar - make you maiden it 

(If you crash it, you make me a new, improved Honker Bipe  )

Wow!
Went through all the pics slowly.
Noticed a lot of fine points.
Wing locating pins, sprung tailwheel leg, quality pushrod linkages at horns, main UC mounted to give a little toe-in, triangular section longerons...
UC legs covered in Monokote - gives a new meaning to wheel pants!
And entire build completed in a single day. 
All you need now is a pair of symmetrical wings to have a fully aerobatic avatar!

Eagerly await video of maiden flight.

Hey thanks, Iyer sir

Glad you noticed the toe-in.....no one does (except me of course )

Used colour tape for the UC legs, not monokote. In fact I normally use Vinyl (The Spadcap, Balsa Piper Cub) but felt lazy 

Confession: The build took me a week, @ 3-4 hours per day average 

Next Bipe will be Bucker Jungmeister - the Pilot (OK Model) version 

As to the maiden.............

Awesome Sanjay Sir!!! Wonderful build. I use Jedelsky wing (foam) for one of my light weight trainers and absolutely love it. Good lift and more because resembles the airfoil of a bird wing.

Eagerly looking forward to the maiden video

Thanks so much Vishal

Recognize the motor & esc?

 

Quote from: sanjayrai55 on October 10, 2014, 01:52:45 PM
Recognize the motor & esc?

Hahaha

Superb Sanjay Sir  Looks like ARF kit 

Hi sanjay,

Thanks for the Balsa tip, Post the model AUW and electric setup. Nice build  waiting for flight video.

Sahil

Thank you Nithinraj

Quote from: sahilkit on October 10, 2014, 06:38:47 PM
Hi sanjay,

Thanks for the Balsa tip, Post the model AUW and electric setup. Nice build  waiting for flight video.

Sahil

All in the thread. AUW 1080 gms with 2200 3S Lipo

Grounded

Setting flaperons. Reversing. Pressed wrong button. Reversed throttle

Stay safe everyone

I normally use the "throttle lock" button on my radio (HiTec Optic 6) when doing this, but was careless

As Girish once remarked, when fiddling, take the prop off 

oh thats a bad cut, get well soon.

Wishes

Sahil

Thanks Sahil

  That's really bad. Take care Sanjay sir.

Thanks Vishal

Take care ,Get well soon Sir......

Thank you Ramarao 

Sir hope you are fine. Take care sir.

I'm tougher than I look

Thanks Neil, I'll be fine

nice build sir.