as we all know that bl 2204 cannot be mounted on the stand through the screws so i came up with the idea of creating a breakaway mount for use with my moss as i have had most of the troubles with the motor coming out even with zip ties. one more thing this mount can be used in most of the park jets too. first step is to collect the following.

Rubber bands as many as you can
tooth picks wooden or plastic wooden recommended as they don't bend
a spare piece of balsa(for bigger motors) or any small piece of wood or a piece of tough plastic
and of course your motor with gold bullet connectors or the ones which you prefer soldered on.

oops forgot a bit of fevikwik or anabond or you preferred glue

and if you need a spare square piece of foam for padding

will put in rest of the instructions with photos tomorrow or by day after as i have some school h.w. to finish then a bit of soldering on the moss too. so until then collect these items. and please do ask your questions or even post in your suggestions here

try to get the thick rubber bands but the smaller one will do tooo.

if you don't like the glueing method you can always use the screws. this mount is pretty adaptable