I had got a VT-Speedster from Vortex-RC about 2 years ago. Finally decided to build it.
Specs:
Wingspan: 1180mm
AUW: 712g

Electronics:
Battery: 2200mah 3S 25C
ESC: Plush 30A
Motor: Turnigy D2826-10 1400kv
Prop: 7x5

I get a decent 10-15 minutes flight time with the 2200mah battery on this plane.
Cruises around decently at 1/3rd throttle. Lots of power in reserve.

I am planning to get into FPV soon and this should be the perfect plane for that

Videos:

BUILD

Sanded the surface of the wing and filled dents with Epoxy

Decided to not use the provided covering and go with something brighter
Used coloured tape (from stationery shop) to cover the wing.
Later I applied a layer of transparent tape over this layer on the full wing to increase strength of the covering.


Top:




Bottom:

Waiting for videos 

Sorry    Scrolled up, and there they were 

Nice flying 

Thank you. 

Cut out the elevons:

beautiful build maahin.
colour tape scheme is looking awesome. seems it loops easily.

Have you used DR ?

Yes, I am using DR. Plane becomes very sensitive at high speed, so have to switch to low rates

Sent from my Nexus 5 using Tapatalk

Placing components to check weight

AUW: 622g

The wing is meant to take a 4000mah battery. As I am using 2200mah batteries, had to add 90g of nose weight to balace it out

Final AUW: 712g

At the field:

The wing flies very nice. Cruises around very easily at 1/3rd throttle and enough power for vertical climbs when needed.
I'm getting about 10-12 minutes flight time on a 2200mah battery.

fantastic build Maheen...... Wish it was flown in sec29 Live.

Nice build maahin bhaiya that yellow and black colour scheme looks good .

very nice

Nice and very neat built. Looking for more videos.

saw you flying it at hoskote. its Gorgeous! after watching you fly, inspired me to build my own wing!

Thanks everyone

Sent from my Nexus 5 using Tapatalk

build plan plz  like dikmesions etc
such a nice build 

Already posted. See first post