hello friends this is my last build i will be doing as i am going to take a long break of 3 months from this hobby
so here is my new flying delta wing made from high density thermocole
.....i need help fro thew experienced builders on how can i mount the motor securely
and will this motor  be sufficient
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5431
also please suggest other things

Wow... nice foamy !!!

hey people are looking for you!

whAT  ?

akky, he said me and not u... continue your nice build.

2 more

Name inspired by Transformers? Best of luck with the build...

yes

Lovely! I like it. All the best!

thank you ....did the test run of the motor a few mins back ....and u know what it really screams...... due to which i got a tight slap from mom and a broken prop  but still hum sudharnay walay nahi hay.....will try do the maiden on sunday

Hey nice build!!!!!! all the best for maiden!!!!

can u pls share some tech details, like wingspan and all that!!!!

what is the purpose of all those extra section placed on the wing?

abt motor i am using same motor with 2500Kv on my F15, 18" wingspan

all the best!!!

it just adds to the 3d  look.....
will do the measurements tomorrow and
let every one know

good idea!!! so how did u managed to mount motor!!

i still haven't done that i need the help of other members
for that
but no help received so far ......will think of something around the night will building tomorrow....1 thing
i  want to ask since i am planning
to make it pusher
so do i have to give the motor upwards direction on downwards direction 

if u hav 3mm or 5mm balsa then u can use to make ur mount. but since due to shape of the wing u have to make sure prop stay clear from ur wing!!!! to support mount u have to add some vertical piece as well. i am assuming u r mounting motor in pusher style!!!

in case of my foamy, i use Sunpack board, generally used in advertising... u can also use 3mm normal ply.

but make sure ur mount should come out from rear, so that prop is not touching anywhere!!!

Hey can you post a latest pic of your Star Scream ? I am sure it looks interesting....

Once its up and ready to fly, please put Decepticon logos on the bird. all the best  

friends i am confused .....should i make it pusher or puller.....?
and the the total wingspan is 37"
chord is 9.5"

as far as i now, wings are mostly pushers!!!!! but if u want u can make it puller as well, but in this case most of the impact while landing might come on motor, and may face some problem!!!

wing span is 37", are u sure if 1806 will give enough power? i am little doubtful, but there is no harm in trying it!!!!

yes i am also having a doubt ....planning to use fc 2812 with 9x5 prop

u were right ashish bhaiya......the motor was not sufficient for the plane so order two of these
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5353

some more pics after my todays work on it ....
everything has been sticked together , reinforcement has been done
control surfaces put and sticked , horn has also been put, motor mount prepared and mounted..
now only servos are to be attached,, Velcro to be applied for putting the electronics and sticking the fins.

1 more

hey it looks pretty good!!!! congrats finally finished mount!!! and all the best!!!!

just a doubt, will motor mount create drag!!!!??

the exsistance of this plane is no more its destroyed...every bit of it.....plus  I HAVE GIVEN UP SCRATCH BUILDING FOREVER