hi friends this is my first delta wing plane
my own design again
tech details
max wingspan is 18 n 1/2 inches
length:19 inches
this time i am going to try 4 fins instead of 2 .. built from depron...
electronics still to be mounted
Great build Akky. A KFM2 aerofoil would have given wing loading, allowing to fly at very little throttle.
The control surface look fine to me. As aI told you over the phone, give very little throws for both Aileron and Elevator - 20-30% DR would be more then enough. On higher throws, Flywings behave very erratically. Keep the CG perfect before powering the motor for maiden. Do some test glide with every thing fitted.
it has a little bit of kfm 2 ..not much steep but it has a litle bit
actually i also didnt have much depron...
this is built from old cuttings and remnants of depron i had
Nice one Akky I Like you colour Scheme and design.
someone please help me for mounting the motor :banghead: :banghead: :banghead: :banghead: :help: :help: :help: :help: :help: :help:
Quote from: ujjwaana on May 09, 2011, 03:23:36 PM
A KFM2 aerofoil would have given wing loading, allowing to fly at very little throttle.
nice build akky , as ujjwal said KFM2 aerofoil gives very good gliding pattern ,infact i have tried on my own designed delta it works great .
between nice build and belly pattern looks like some kind of illusion! all the best for your maiden!
it is has a little bit kfm2
Quote from: akky on May 09, 2011, 03:41:04 PM
someone please help me for mounting the motor
Almost every single motor mount is discussed here :
http://www.rcindia.org/tools-materials-and-building-techniques/how-to-mount-electric-motors-on-foamies/
hey its really nice built!!!!
try using something like this
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9869
anwar sir there no mount suggested for a delta wing al mounts re for stick but there was definitely a clue ...got it ant the mounting is under process
dont have this mount ashish bhaiya plus i am bankrupt these days :banghead: :banghead: :banghead: ...
but the idea i have come up with is even better than this
Quote from: akky on May 09, 2011, 04:06:42 PM
anwar sir there no mount suggested for a delta wing al mounts re for stick but there was definitely a clue ...got it ant the mounting is under process
Basically you can go with the stick, or a ply sheet stuck well with triangular supports.
Welldone.. I am sure it would fly the way you wanted it... All the best.
mount has finally been prepared
in the first pic of this post one can notice the Kfm2 stepping
motor mounted
i more help needed :help: :help: :help:
Can anyone guess the CG of this design ? :headscratch: :headscratch: :banghead: :banghead: :help: :help:
You can calculate your CG here http://fwcg.3dzone.dk/
Nice / Neat . Aching to maiden it now.