Hi all 

My balsa stick biplane,
Top Wing - 48 Inch
Bottom wing - 40 Inch
Fuselage - 38 Inch
AUW - 1200 Grams

Maiden flight was done yesterday, below is the video.

Really nice touch and goes!

  good

Very Nice

Very good.👍

Thanks Iyer Sir/Abin/Ashish/SI74


Will post some build pic soon  

 
Few more pics

@r c,
Is this a kit?
The build and finish quality is outstanding.
It is an example worth following for members who have made models that fly ok, but look a bit rough!
Regards.

Thanks Iyer sir,

It's not a kit, but Kit is available at http://www.radicalrc.com/category/Millennium-E-Kits-239

I wanted to post the build pic while i was building, but i was not sure if i would get time to complete the model soon.
Like my other biplane build (Golden Oldie) where i took almost a year to complete the model and later another six month for the first flight  
So decided to build this stick biplane and then post it on forum.


While i was searching something on net, i came across the below image of the stick biplane and decided to build one.
I just tried to copy the model in the image, there are no plans for my stick biplane.
Just decided the wing/Fuse size and the rib profile and got the ribs and some other part cut for the model.

I have used 10mm carbon square tube for fuselage and 10mm round tube for wing.
i did a split wing design for this model so that it is easy to carry the model to the field, the guide for the 10mm round tube for the wing was  made of newspaper - which came out very nicely.
This was a quick build, only thing which took most of the time while building was wing covering

Will post the build pics soon

Very nice!

Superb! 

Lovely flier, very smooth and stable

Waiting for the build log

nice plane....

Thanks 

Sanjay Sir, as mentioned earlier this was a quick build - so not much pics to share.

Pic of stick Fuselage.
Section which holds the wing to the fuselage is made from 3mm ply and wing ribs are 3mm balsa.

Few more pics

Wing pics

Exceptional build, even more so considering it is built from a photo without plans 

What are the full specifications, and details of power system used please?

Thanks a lot Sanjay sir   


Top Wing - 48 Inch
Bottom wing - 40 Inch
Wing cord 6.5 inch
Fuselage - 38 Inch
22 grams servo for Rudder and Elevator
16 gram servo for Aileron
35mm Turnigy 900kv motor, rolling 10*3 slow flying prop
3 cell battery.
Total AUW - 1200 Grams 

Lovely! Nice and light for a model that size