Can anyone suggest a styrofoam Flying wing plan that can carry an APM , GPS,FPV TX ,cam, OSD and Telemetry radio, and is stable enough and is compatible with my setup. Motor: Turnigy D2326-10 1400kv , ESC-40 amp , 3 cell 2200mah Lipo? Plane should be easy to build ( I'm using hot wiring) and wingspan of more than 42 inches to 56 inches.

Check ft spear of flite test

Check this out  https://www.flitetest.com/articles/ft-mighty-mini-arrow-build

I want something of styrofoam, not foamboard

Why not design one yourself?
You can choose the airfoil and wing parameters.
It will be as you want it.
Regards

oaky bro thanks. I will build it myself

Hello

Is your chosen motor correct for your setup....?

Motor: Turnigy D2326-10 1400kv

Yes

Check out these videos.





All the best
Nitesh

i changed my motor setup to d2328-6 1100kv , here is my plane

i mean d2326-8

Here is the 54 inch beast , used a 60 inch hot wiring machine I made. Took only 2 days. Need to make the cockpit and streamline the front.

I mean 40 inch hot wire

Used the MH 45 flying wing

Homemade umbrella string pushrod.

Pic

Take care as the motor mount is backwards you will have to put extra weight on nose .....Way more than planned ...... To save that reduce the motor mount length and give extension for nose to balance cg with less nose weight

Bro, the calculated CG is long back ( I mean 15% ) . I also included a nose heavy hull

The hull is of two parts ( the main nose, which I intend to drill to make space for my cam ) and the top cover.