Well.. One of my summer projects this summer is a plane!
I have LOADS of sim time, so if I fly carefully, I should be able to learn on a yak 54, right?

So, I was looking at the 25mm EPP Yak 54 from rcforall:
http://rcforall.co.in/product_info.php/products_id/48

The main reason I selected this is because I dont wanna grow out of a trainer too fast..
Also, the cessns is only 3 channel, whereas the yak is 4.. Also, it's BIG.. From what I've heard, bigger is more stable, right?

Motor comes with the kit..
ESC:
http://rcelectro.com/index.php?page=shop.product_details&flypage=flypage.pbv.v5.tpl&product_id=31&category_id=5&option=com_virtuemart&Itemid=5

Radio is the HK 6ch available from Mr. Praveen..

Servos:
http://rcelectro.com/index.php?page=shop.product_details&flypage=flypage.pbv.v5.tpl&product_id=27&category_id=4&option=com_virtuemart&Itemid=4

Not finalized on a battery.. Looking for a 3s 1000-1500 mah 30c.. Not able to find any 30c.. Only 20c 

Any suggestions?

Thanks,
Divyam

try building this , easy, cheap and good

http://www.rcindia.org/electric-planes/yak-54-biofoam-electric-30-inch-wingspan/msg52910/#new

learning to fly on a 3D plane that too a flat profile ..... ...its a pain.....believe me i have been trying the same i have a already abused two brand new epp planes that they are no longer in flyin condition going to do with 1 more after my exams but no i can fly it well ...but seriously you cant learn proper flying from these flat foamies .....it better you get an easy star or easy cub....its a free suggestion my my side if u want it you can take else your choice....
taking of yak...i personally don't like yak...its better you build an extra

plus as beginner in 3d  use a normal 2s 1000mah or 800 mah.....at 3s it donst give that better response for 3D

Thanks for the suggestions, guys.. I have learnt PROPERLY on a sim.. So, hoping I can start with a 3d Foamie.. (So I don't grow out of it too fast) I was hoping to reduce EPA..
Else, I'll go with the Cessna 182 from Techone..
http://cgi.ebay.in/Cessna-182-Mini-Plane-Motor-and-Prop-/150570144292?pt=LH_DefaultDomain_203&hash=item230eae1224

@Augustinev
I don't know lotta techniques for building from scratch..
So, I wanted my 1st foamie to come with all hardware included.. Maybe after this, I'll start scratchbuilding..

IF I do go with the Cessna, how are these electronics?
ESC:
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=58_59_95&products_id=392

Servos:
http://cgi.ebay.in/HIGH-TORQUE-SERVO-3-1-GMS-/110629591254?pt=LH_DefaultDomain_203&hash=item19c20998d6

Battery:
http://cgi.ebay.in/RCFORALL-BATTERY-7-4V-440mAH-2S-25C-/150548633606?pt=LH_DefaultDomain_203&hash=item230d65d806
Seems a little heavy?

divyam beleive me practicing on the sim and flying on the field are both very different ...i suggest u get a cessna or wait a while RCD is getting easy cub

Finalized.. Going for the Cessna.
Will try to add ailerons and make it 4ch..

Thanks for the help guys..

Hi Divyam,

you choice is just correct FOR CASSENA .YAK 54 is a very sensitive plane,I bought one (balsa /ply with ORRA cOVER0 but I will build a foam YAK 54 
http://www.rcindia.org/electric-planes/yak-54-biofoam-electric-30-inch-wingspan/msg52910/#new

Let us all know your progress

regards
peter

I didn't see the cessna but its foam right?

How about this?

http://www.rcpowers.com/forum/showthread.php?6006-F-22-EasyBuild-V2

Ya, the Cessna is foam..
The F-22 is certainly a harder model to learn on..

Really???

It looked slow.You can upgrade the motors and go faster.