Pls don' t remind me of the addiction 

red and purple, the next two, how is the idea ?

got couple of enquires on addiction x
Airframe ESC & Motor (I Suggest you go with this)
http://shop.singahobby.com/?q=node/25635
Airframe Only
http://shop.singahobby.com/?q=node/26477

This is the easiest way to get it, customs + of course

where i can get this plane in india?

http://www.precisionaerobatics.com/home.php

some more shots of PA Addy x

Happy to see the Addiction X airworthy again. 

some more pics of addiction x

today was addiction x day, flew 5x 2200mah 4S for about 70 minutes, before rain hit, here are some pics.

Highlights

KOD (Kiss of death) sunny couldn't capture that
Inverted landing with zero damage
Nice, steady blenders
Torque rolls
Rolling Harriers
Lots of tumbles and inverted spin

upload performance videos sir

some more shots (Rest in FB)

Quote from: satz flying on September 08, 2012, 04:10:07 PM
upload performance videos sir

Need a helping hand, all this by my 12 Yr old.

A few Mod post motor mount ripping off incident

1. Blue Cowling coz red decal will change to blue (Ordered another blue cowling, i guess post office ate it)

2. Changed over Turnigy 3020B. with this i am on a 4S 2200 mah batt and a 14x8 prop, 1/2 throttle hover 7 min flying time and 54 amps draw at WOT. Lot of propwash (Required for Addy X to control you torque roll especially when giving forward elevator correction)

3. Moved the rudder servo from the motor mount to the fuse, so got into CG issues, therefore added some weight and mounted motor upfront as seen in the image

Changed back to Thrust 40 motor, but a 4S setup with 12x6 prop. enjoying early morning 3D flights

today's flying

Awesome

that's a mig 21 in the back??! where do you fly?

Those are yester years Sukhoi-7, retired now and in the museum now

oh... looked like a mig... they both had a similar-ish build...

Deserves to go here too, so what if it is realflight

Quote from: rcpilotacro on April 30, 2011, 05:18:57 PM
I ordered 82 Metal Gear with Rotor.co.in, i got Hitec 81 Nylon Gear, some packing error , there is no Hitec 82MG in the world, even on HK it is on BK , found a good alternative to 82MG this one (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6608) , dunno whether to go with it or not Got two alternative motors instead of thrust 40 , no names no stickers, just simple motors, similar dimensions and weight, one is 800KV and one 1000KV, rest i need to figure out on my own

Hi,
Please can you upload links from HobbyKing for theMotor/ESC combo and servos you have tried on your 3D and would recommend to fellow modellors.... You have mentioned the above D-MG 16 Servos... how are they performing??  any good ??
The plane will be around 1.2KG with 3 cell battery 1800 to 2200 mah and I really do not want to go above this as all my models are based on 3 cell batteries.
I had Corona 9 MG (from Hobby King) metal geared servos on my MX2 and they jittered at a certain Stick position .... good job I noticed and substituted them, or else I would have lost the model on its maiden.


" Deepak Chopra  97 points - 9/6/2013

I bought 6 of these at USD 4.55 each ....Corona 929MG Metal Gear Servo 2.2kg/ 12.5g/ 0.10sec I used 2 of them in my MX2 3D in the wings. Thank god I did not fly the plane with these in it or would have been carrying a bag of bits home..... Tried everything to sort them out, I have had to remove them eventually.... Not very happy with them. What will I do with the 4 others ..have yet to decide... These servos are glitching...anyone know why??



See this video;

sorry for late rep, saw the post now, during that time i was out of country. sorry again

eventually ended up with Thrust 40 motors and Hitec 5085 servos, on the other one i am going to try JR servos will let you know how it performed. ESC is YEP 6S capable.

This aeroplane flies like a dream, crash resistant ? not at all. wood quality is good, motor mount is its Achilles heels, twice i have had motor mount flying off, but then i was using motor which was 1200W as opposed to rec 500 W,

Thurst 50 (not 40) and a good ESC is what i will recommend. you are better off with hitec servos, i used MKS to all kinds, no good

corona servos are crap, what do you do with them ? keep it, you could use it sometimes in non critical areas like barn door flaps, hook release etc

Sorry Gusty,
I have already bought the motor and ESC.....
See image.. need to buy some 4 cell packs now.

Quote from: rcpilotacro on February 22, 2014, 11:19:48 PM
sorry for late rep, saw the post now, during that time i was out of country. sorry again

eventually ended up with Thrust 40 motors and Hitec 5085 servos, on the other one i am going to try JR servos will let you know how it performed. ESC is YEP 6S capable.

This aeroplane flies like a dream, crash resistant ? not at all. wood quality is good, motor mount is its Achilles heels, twice i have had motor mount flying off, but then i was using motor which was 1200W as opposed to rec 500 W,

Thurst 50 (not 40) and a good ESC is what i will recommend. you are better off with hitec servos, i used MKS to all kinds, no good

corona servos are crap, what do you do with them ? keep it, you could use it sometimes in non critical areas like barn door flaps, hook release etc

Thrust 50 motor...is that Hobby King??
"Hitec 5085 servos" ..............  Are these a reasonable equivalent of these on HobbyKing..;
http://www.hobbyking.com/hobbyking/store/__9814__Hitec_HS_82MG_Micro_Metal_Gear_Servo_2_8kg_19g_0_12sec.html
?

By the way what do you think of these;EMAX ES09MD Digital Metal Geared Cyclic Servo
http://www.modelaccessories.co.uk/emax-es09md-digital-metal-geared-cyclic-servo-for-450-helicopters.html
EMAX ES09MD

Digital Servo With Metal Gears Designed For 450 Sized Helicopters.

Weight: 14.8g
Dimension: 23*12*24.5mm
Torque: 2.3kg/2.6kg.cm 4.8v/6.0v
Operating speed: 0.10/0.08 s/60° 6v
Operating voltage: 4.8V - 6V
Bearing: Dual Bearings