same as in the plans 12.5inch

Since my last post i build a full size blue baby 24 inch model out of balsa and Foam but was waiting for 4ch airtronics receiver to finish the model. Original plan was to use HK super micro brick with 250mah battery and 10g RCB BLM but the setup needed MOP. Right now in the process of modding the fuse to accommodate 3.6gram servos, 2S 300mah pack, 6gram ESC, motor & RX.

Fuse

why this in such a fantastic model ? red circle.??

it is one of the most successful 1st time beginner model on the net and "RED" was to enforce the rudder

I know but put it in a way which is in line with aerodynamics!!!!
this way you are obstructing air flow..... the plane will still fly, but might show unnecessary uplift.
lie them down and sand them so they are not obstructing air flow.

will do some patch work to make it more aerodynamic !

A Nice plane
Regards,
Aman.

thanks aman.

Nice video on how to do push rods   , i have used this method but sightly different.

Plane is mostly done, landing gear and misc stuff left 

coming out goood,So whats auw now,carefull with auw its a 12incher

weighing scale has run out of battery need to replenish them and its a 24inch WS.

Model is finished, waiting for batteries to charge and wind to come down.

Too windy here in mumbai aswell  sorry i thaught it was 12"ws....hey sahil i just remembered looking at your pictures i had built some thing similar here it is.... this also was a 24wing span http://www.rcindia.org/electric-planes/stick-n-foam/msg137724/#msg137724

Too windy here in mumbai aswell  sorry i thaught it was 12wing span....hey sahil i just remembered looking at your pictures i had built something similar here it is.... this also was a 24wing span http://www.rcindia.org/electric-planes/stick-n-foam/msg137724/#msg137724