Hi All,

Can I use 6X4" propellers for my Sky Surfer V2.....

My concerns are

1. There are not much clearance margins between the fuselage and propellor

2. Will it over heat the motor

3. How do I fit it into the shaft as it is not locking properly.

Thanks

1. enough clearance is there for a 6 inch to fit
2. run 6 x 3 and go easy on throttle , should not be a problem
3. trim the inside of prop with reamer, etc.

Thank you so much...wont reaming the propeller make the hub dia large and over doing it can spoil the hub dia.?  is ist recommended?