Hi all I am new to this forum.
I am planning to make a plane having TWO motors. For that connection shown below right or wrong?
Correct me if it is wrong.
And which charger is is good to buy[below 3000/-]?

 http://www.rcdhamaka.com/index.php?main_page=index&cPath=102_96
 http://www.rcbazaar.com/category/125-chargers.aspx

Donot connect two ESCs in series...as you have drawn...
connect the inputs of ESC in parallel with the battery..

OK.
As in the fig. can i connect the BEC going to the rx in series. BEC has 5V and 2amp (Correct me if it is wrong) multiplied by 2, so totally it gives 10V and 4amp to the rx. Right or wrong?
And which charger is good?

Also take out one of the centre wires from any of the esc's and
Connect to the receiver using a y cable

Thanks.
please can anyone tell which charger is good to buy below 3000/-.

http://www.rcdhamaka.com/index.php?main_page=index&cPath=102_96
http://www.rcbazaar.com/category/125-chargers.aspx

I am hungry of it.

Quote from: Aniket1995 on July 21, 2013, 01:06:24 PM
I am hungry of it.

wha??

i would say best charger is turnigy accucel 6....

this is hobbyking:
http://www.hobbyking.com/hobbycity/store/uh_viewitem.asp?idproduct=7028

this is LHS:
http://thehobbyshop.in/index.php?main_page=product_info&cPath=17_18&products_id=59

Thanks.
how is this 'IMAX B6 AC Lipo battery charger/discharger'.
http://www.rcbazaar.com/products/1945-imax-b6-ac-lipo-battery-chargerdischarger-not-original.aspx

No stock in Thehobbyshop.

that's good too... though if i am not mistaken, i read somewhere that it gives incorrect reading.... error of 0.1V...