Hi,is there any problem using a 1500kv  motor in a 64mm edf system,can anyone suggest me?

too low an RPM isn't ? you will need atleast 4000-5000 kv motor

Too less KV for 64 mm. If you are able to setup the power system with 5S or 6S lipo and if you motor supports 5/6S setup  then 1500 KV in 64 mm EDF will have sufficient thrust. However a 64 mm EDF is a smaller EDF used for small parkjet scale and a parkjet will rarely be able to carry a 5S or a 6S. Even if it is able to it will be less than 1800 mah.

Ohh,great for your info,i dint find any motor in
rcbzaar or rcbharat so i got that 1500kv motor frm rcbazaar and rest were out of stock. Any store from where i can get those motors.

Turnigy 2615 EDF Outrunner 4800kv for 55/64mm

So is this 1500kv motor  good for 70mm edf?,if its good then i will go for  70mm..

for a 70mm EDF too the reply is same as posted above.

However which 1500KV motor of RC bazzar are you talking about? post link. I have a reason to believe you are referring to the one for 90 mm EDF.

in EDF you have to match the motor diameter and shaft diameter with that what is required for that particular EDF.

http://www.rcbazaar.com/products/1474-odin-2627-kv1500-thrust-700gms.aspx

That is not an EDF motor at all.

your EDF Link?

http://www.rcbazaar.com/products/1318-64mm-electric-ducted-fan-unit.aspx
This is it

So is there any Indian hobby shop available for this edf and its motor. Please send me a link

rcbharat have one, motor with edf installed..
http://www.rcbharat.com/brushless-motors/185-mystery-edf-hl6408-2427-4750kv-brushless-motor-64mm.html

 Approx... how much bucks would it cost me to order a edf motor frm hobbyking including its shipping.. charges??

The EDF seems more like a one which requires a 20 mm Inrunner Brush-less.

Some thing like this would fit. Only ensure your shaft adapter is compatible here it is 2.3 mm shaft dia for the motor

http://www.rcbazaar.com/products/1170-inrunner-brushless-motor-b2030-kv4300.aspx



out of stock there though

PS : Guys are searching for your benefit and posting. It would do you much good if you search and read and gain info your self and decide.

Quote from: Shyam Hembram on March 09, 2013, 12:52:04 PM
Approx... how much bucks would it cost me to order a edf motor frm hobbyking including its shipping.. charges??

please take the effort to click on the link posted by Arun. 

May this one is available with him still check with seller.

http://www.rcindia.org/for-sale/electrifly-inrunner-brushless-motor/