today i badly hit my model to the ground due to turbulance of the wind. it resulted in bent shaft of my BL outrunner motor. pls help me how to rectify it. i already removed the outer case.

Which is the motor you have ?

We have these spare shaft combos  :
http://cgi.ebay.in/REPLACEMANT-COMBO-FOR-RCFORALL-BL-MOTORS_W0QQitemZ110398481884QQcmdZViewItemQQptZLH_DefaultDomain_203?hash=item19b44325dc&_trksid=p4634.c0.m14.l1262


sai

I am havin Turnigy -C2830- 1100kv motor. Shaft dia is 3.17mm. I got this motor from singapore, so i dont know tat i may get spare for this. Is there any possibility to rebend it using a vice or some other tools?

if this shaft is plain, i mean not a complex shape then u can make it on lathe machine.post a pic that will help..

i dont have any complex shape, but it has thread on it to fasten nut with prop. it is not needed since i have a prop saver. If i can machine it, then what material should i choose?

Before you attempt anything else, just swing by the neighborhood auto/mechanical workshop (the ones that do lathe stuff) and see if they can help you.

 i had a similar problem , got it in perfect condition from the nearby lathe workshp for rs 50

santhosh

thank you guys for your help. will check a lathe workshop soon...