Main Menu

Edf motors

Started by Shyam Hembram, January 23, 2013, 11:08:40 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Shyam Hembram

January 23, 2013, 11:08:40 PM
Which motor is good for edf units, a low kv or a high kv motor.? :headscratch:
Hiller450 chopper,Sky surfer v2,Wilga2000,450quad(building)

santhosh-r

#1
January 24, 2013, 05:04:52 AM
For EDF high KV is suited best....correct me if I am wrong...
Spektrum DX6i | Phoenix V4 | CoroTrainer | Tamiya Baja king 2WD | RCTimer F450 Quadcopter

arun.sreelakam

#2
January 24, 2013, 07:21:45 AM
It depends upon the power needed and motor specs..
Some are using 1500kv motors with 4s-6s lipo
some are using 3500-4000kv motor with 3s lipo..
All with respect to the power weight ratio... :):)
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

1firefly2

#3
January 24, 2013, 05:54:37 PM
For bigger dia fans, go for lower KV motor. For smaller dia fans, go for higher KV motor.

samant mishra

#4
October 14, 2022, 10:20:04 PM
 The import part is motor wattage & higher voltage motors (6S or more) give you good results.
Print
Go Up Pages1
User actions