Problem trying to flash Rctimer 30A esc

Shehwar · January 15, 2013, 09:21:07 PM

I'm having problems trying to flash my rctimer 30A ESCs.
I'm using ExtremeAVR burner software.
This is the error i get.

deepakkshr · January 15, 2013, 10:06:43 PM

did u choose the proper .hex file ? and u got ant error while compiling ?

Shehwar · January 15, 2013, 10:54:21 PM

I chose the tgy.hex file as suggested from the rapidesc database.
And the problem is arising during verification. it is showing mismatch at address 0x00000000

deepakkshr · January 15, 2013, 11:16:41 PM

try ESC Flash Tool coz it downloads the latest firmware. so that u can avoid these problems. if u go with avr, there are lot more settings you have to know. generally about the fuse.

Shehwar · January 15, 2013, 11:21:13 PM

It says unable to connect to remote server......

deepakkshr · January 15, 2013, 11:39:12 PM

On the right hand side of the Flash tool, u'l see offline settings. check Use cache and choose the hex file. this is used for flashing in offline mode

Shehwar · January 15, 2013, 11:46:22 PM

this is the result.

Thank you so much.

deepakkshr · January 15, 2013, 11:57:15 PM

that's great .. ur welcome