Lipo selection for motor

Started by Sreedhar, October 12, 2010, 04:57:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Anikethan.N

#25
Hi can I use this Wolfpack 2200mah 20c 11.1V that motor.

http://www.rcbazaar.com/products/1266-wolfpack-2200mah-20c-111v.aspx

Battery Specification:
• Size:
• Capacity: 2200mAh
• Voltage: 11.1v
• Continuous Discharge Rate: 20C (Burst 30C)
• Charger Time: Recommend (by input 1mah)
• NetWeight

Moter Specification:
RPM / V - 1200 rpm
Cell - 3 cell / 11.1V
Prop - 10 x 4.6
ESC - 20 amp
Weight (approx) - 45 gms
Thrust -  810 gms

and it says to use 10x4.6 prop if i use 10x4 or 10x5. will it cause overheat.

santhosh-r

sure...you can use the battery with that motor...
It is better to use a smaller prop than recommended...
Using a 10x5 may cause it to overheat a little...
Better use a 9x4.7 prop...
Spektrum DX6i | Phoenix V4 | CoroTrainer | Tamiya Baja king 2WD | RCTimer F450 Quadcopter

wingmanbunty

how much amp of esc is required if i have 55amp battery i mean 2200mah 25c 11.4 volt battery , thank for the information you posted on blog
EAT ,SLEEP , FLY

BruceS

 recommended to use a higher C rating, such as 35c 1000mah 3s lipo.