Print Page - motor for 600g plane

Title: motor for 600g plane
Post by: kinnu on June 11, 2012, 10:13:47 PM

i have complete my basic plane structure :)
the total weight of plane is about 600gms without receiver :thumbsup:

Is this Motor sufficient for My Plane ?

C 2826 - KV 1350 - Brushless Outrunner for RC Airplane

Power(W) : 240
Wire Winds : 11
Resistance(mΩ) : 137
Idle Current(A) : 1.2
ESC(A) : 20 A required minimum
Cells Li-Po : 2 - 4
Prop : 8x3.8/7x4

??????

Title: Re: motor for 600g plane
Post by: coderbanna on June 12, 2012, 08:04:34 AM

should work, 250 watts is a good motor

Title: Re: motor for 600g plane
Post by: abhay on June 12, 2012, 01:02:14 PM

kinnu, 250 watts will overpower your plane.. i can even make it uncontrollable.

refer rcindia gems.

Title: Re: motor for 600g plane
Post by: kinnu on June 12, 2012, 05:01:05 PM

so i should use less power motor ?

Title: Re: motor for 600g plane
Post by: hydroplane lover on July 16, 2012, 12:43:37 AM

it will provide awesum thrust...

Title: Re: motor for 600g plane
Post by: rastsaurabh on July 16, 2012, 12:47:37 AM

Can we have a look at your plane ???? Any Pics??

That would decide a lot on motor selection.

regds

Title: Re: motor for 600g plane
Post by: manojswizera on July 16, 2012, 07:58:01 AM

Kinnu that motor will work good .
If u want any substitute you can go for Cf2822 1200 kv motor.

Attach some pics of the plane .

RC India

RC Equipments => Electric Power => Topic started by: kinnu on June 11, 2012, 10:13:47 PM