any one used a slowflyer 8x4 prop on this motor Turnigy 2204-14T motor 19grams please let me know where to purchase in india, braught aprop doesnt seem to fit and slips

Roman try rounding up the hexagonal part using some sharp blade or so.. will fit perfectly.. 

hey bro guess what im doing the same lets hope it works

Roman use Scissors. they are narrow from beginning and broadens at ends . so u will get correct hole.revolve the scissor contiguously or the prop so that even hole can be done.
just try and see the result.. 

or you can take a power drill with a small bit to it...
just putting it out there...

Hi Roman,
why do you want to make a bigger hole when u r using on 2204? this motor has inbuilt prop adapter.
Sandeep

guess what i have the same issue except my propellers are black....do post the solution...

ok will try scissors thn drill and let u guys know which did the work ,just for my knowledge  who sells slowflyer 8x4 prop for thisTurnigy   2204-14T motor in india only, i mean instead of messing with prop just attach on the hub of the motor ,any one who used it please foward link from where u purchased

Roman go for electric props they have bigger holes will fit perfectly, I dont think will work for slow fly props..
Making a hole in the prop that much difficult 

no prob in making hole there always a first time,let c will try it, heard gws slow flyer 8 x 4.3prop fits perfectly for 2204 cant seem to find it in india

drilling hole works good,i tried using a 8 x6 prop as rc for all sent me these wrong props, it was spinning ok in the start now its moving a bit clock wise then anit clock but not enough thrust even on full throt,it knind of jerks clock wise as i raise throt a little bit,any1 faced this prop ...im guessing 8 x4 is the solution coz without prop motor spins freely....

has any 1 used this prop 8 x 4.3 slowflyer http://www.rcbazaar.com/products/824-slow-fly-propeller-8-x-38-sf.aspx will it work on a TURNIGY 2204-14T 19g , i mean will it fit the hub or shaft

Why are you after a slow flyer prop? Why don't you search on rc dhamaka for a 8x4e?...

Sent from a potato using tapatalk 2