my esc and motor burnt

Started by avinash.tutu, January 19, 2010, 10:49:08 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

VC

Avinash,

Sorry I couldn't revert to you earlier. I was caught up in too many things including my first Para Gliding experience. Please PM me your phone number.

Regards,

VC
Growing old is mandatory, growing up is optional!

anwar

Sorry to hear that.  Did any of the electronics or power system get damaged ?

I do wish you had tried the first flight in a paddy field with the plants that have grown up to some height (thereby absorbing most of the impact).
Hangar : Please see my introduction.
RC India forum and me : About this forum.

sahilkit

avinash build a stick type model similar to slow stick GWS, i'm sure your next model will fly great just don't over build the model, stick to the plans and select a model which will work with your present electronics,power system etc!

sahil
Today might be a great and wonderful day. It depends on you.

avinash.tutu

can anybody give a  plan of stick model, our power combo is given in the post

sahilkit

hey avinash i just went through the link astha has posted about the motor, i think a Bohur 25 would be good choice! lets see what others say..............

http://www.spadtothebone.com/freeplans.htm
Today might be a great and wonderful day. It depends on you.

avinash.tutu

fortunately nothing happened to our electronic parts,
Anwar in our area we couldn't find any paddy field. Now we are in kollam.This is very congested area. We have a large ground in kollam, it is asramam ground, in which we performed our failed flight :'(

Sethji

#31
Hi Avinash,

You wanted a build plan for a stick-model... please see the attached...

This is a light weight slow-stick...for the fuselage you could use an 1/2 inch aluminum channel or the rods of the TV antenna... For the body use the material used in sign-boards (corrugated plastic). You need two 5 or 9 gms servos and a 3 channel Rx-Tx...

Goodluck

dinil

#32
clean design
the pics describe everything

but how to attach motor at front

sahilkit

Today might be a great and wonderful day. It depends on you.

anwar

Sahil - It can still take a motor ;)

The first time I saw this on the blog, I felt that it is a close cousin of the MOSS glider from Sai !

Dinil - Lots of mount options discussed here : http://www.rcindia.org/tools-materials-and-building-techniques/how-to-mount-electric-motors-on-foamies/

Hangar : Please see my introduction.
RC India forum and me : About this forum.

Sethji

Quote from: dinil on March 02, 2010, 06:41:38 PM
clean design
the pics describe everything

but how to attach motor at front

Dinial - To attach the motor we used the plastic-ties that are used in grocery stores (like Reliance, Spencers, etc) or you can use 3-4 wires and tightly wound it around the motor...

ankur

then also it could be modified to a powered glider
put a motor in the front[in-runner brushed] and a compitable esc
use a 2s lipo
and either make it 3ch with throttle,elev,aler[normal config with throttle]
or 3ch with throttle,elev,rudder[normal config of a 3ch powered glider][aler. servo used for rudder]
or add a extra servo and make it 4ch!!!
get the 380 size motor with gearbox and folding prop from sai uncle and that will be the best!!!
Ankur Singh,
Aged 14-Studing in Class 10th

anwar

Hangar : Please see my introduction.
RC India forum and me : About this forum.

avinash.tutu


avinash.tutu

we decided to go with sassy
http://www.spadtothebone.com/freeplans.htm.
can we use our power system for the same? 

rcforall

#40
Quote from: dinil on March 02, 2010, 06:41:38 PM
clean design
the pics describe everything

but how to attach motor at front

BTW the MOSS Design  Originates in the MISS

MASTER MOSS as it was called was exactly a Motorised version of the MISS in fact the name MOSS is ( Motorised Slope Stick )

here are some Photos of the first MOSS .

Here is a Video of the Master MOSS


Sai
www.zuppa.io : vehicle telematics, ADAS, IoT , Drones

anwar

Quote from: avinash.tutu on March 04, 2010, 11:56:45 PM
we decided to go with sassy
http://www.spadtothebone.com/freeplans.htm.
can we use our power system for the same? 

If you are referring to the one (the name is not "sassy", but there is something more to it) which was designed for 0.15 engines, then your current setup should easily handle that airframe.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

avinash.tutu

please watch our first stepping stone

anwar

It is a shame, looks like a good plane :(

Did you launch into the wind ?  Were any kind of testing done to see if you had enough thrust ?  Can't see if elevator was applied properly or not.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

avinash.tutu

#44
we have almost completed our new plane(sassy........)
http://www.spadtothebone.com/freeplans.htm

but problem is where to fix the landing gear,
can can anybody tel me where to fix landing gears? what is the difference between fixing landing gear in front and back?

speedracer

#45
Quote from: rcforall on March 05, 2010, 08:30:56 AM
BTW the MOSS Design  Originates in the MISS

how much does the Master moss RTF cost?
Ideas Are Bulletproof.....

avinash.tutu

no, there was not much wind.
we didn't perform any tests for thrust.
how to test thrust?


Ashta

it is difficult to write and explain here. it has to be more interactive. pl call me 9448073127, i may be able to give you some tips.
ashta



Quote from: avinash.tutu on March 11, 2010, 10:42:53 PM
no, there was not much wind.
we didn't perform any tests for thrust.
how to test thrust?

You can't be first because you do not know!

allthatido

Astha

I think you should give it a try to explain here..may be in a nut shell so that others also benefit from your wisdom.

Ankur