Hi Guys
Just have a look on these motor.
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=15193
 What do you guys think

come on Guys

Ved this is a new motor. The ratings may be tempting but it is better to go for a tried and tested motor - one with reviews. Im saying this because you are a beginner and a malfunction/underperformance may be expenssive for you.

The shaft seems really tiny! cost cutting i guess.

What is your model  AUW - motor?

PS: you are a beginner right?

The AUW of my plane is 500gms.

For 500 grams CF 2822 will be good , and its cheaper too (weignt wise also). It can take upto 650gms and DO NOT use 10X6 on it. Limit to 10x4 max.

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5354

Its Rs.450 with RCD and VK i guess.

ok

hey!
no no no!

your model is atleast 650 to 700 gms

sorry it was 600gmsplus 200 gms of battery

Haha ok CF2822 is not for you @800 grams you will need a powerful motor. All i can say is you can never trust electronics unless you/someone have tried it before. Hope someone else can help you.

I have a DT750 motor but it may be overkill for you.

i think the dt700 should do good for a 700g model...And ved please mention your aircraft model type for  better suggestions

My aircraft is a glider which weights around 900gms

Ved what prop do you have now? Maybe you can get a motor/esc suited to the prop so you wont need to buy another one.

I have a  APC 9 x 5E Prop. What about this motor
  http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5691

come on

This motor produces 900-1000 gms thrust with 11 inch prop so with 9inch the thrust will be lesser. At 17A cuttent you will need a 25A ESC to be safe. I think its expenssive for $14.

I you are ok with getting a new prop and ok with the price then this should be good.

Wait for someone else to comment - i may be wrong about the prop.

I am going to use 10x5 prop and 35A fixed wing ESC

Hey then you should not have a problem with this i guess.

OK