i have complete my basic  plane structure
the total weight of plane is about 600gms without receiver 

Is this Motor sufficient for My Plane ?

    C 2826  -  KV 1350   -  Brushless  Outrunner  for  RC  Airplane


    Power(W)            : 240
    Wire Winds           : 11
    Resistance(mΩ)   : 137
    Idle Current(A)    : 1.2
    ESC(A)                  : 20 A required minimum
    Cells Li-Po            : 2 - 4
    Prop                      :  8x3.8/7x4

should work, 250 watts is a good motor

kinnu, 250 watts will overpower your plane.. i can even make it uncontrollable.

refer rcindia gems.

so i should use less power motor ?

it will provide awesum thrust...

Can we have a look at your plane ? Any Pics??

That would decide a lot on motor selection.

regds

Kinnu that motor will work good .
If u want any substitute you can go for Cf2822 1200 kv motor.

Attach some pics of the plane .