Changing the shaft of brushless motor

Started by asupan, January 05, 2012, 11:25:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

asupan

January 05, 2012, 11:25:06 PM
Can anyone suggest the method of changing the shaft of a 2207 brushless motor. Any step by step process or tools to be used will be useful.

I tried to remove the circlip and the small Allen bolts but the shaft is very tight. It is a turnigy motor bell type.

arun.sreelakam

#1
October 02, 2012, 04:30:16 PM
man just look for a small 1.5mm L wrench screw in the bottom side of the motor.. loosing the screw will make the shaft come out..
and look for the accurate shaft also for replacing..
regards arun
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
Print
Go Up Pages1
User actions