Text only | Text with Images

RC India

RC Equipments => Electric Power => Topic started by: Shehwar on January 15, 2013, 09:21:07 PM

Title: Problem trying to flash Rctimer 30A esc
Post by: Shehwar on January 15, 2013, 09:21:07 PM
I'm having problems trying to flash my rctimer 30A ESCs.
I'm using ExtremeAVR burner software.
This is the error i get.
Title: Re: Problem trying to flash Rctimer 30A esc
Post by: deepakkshr on January 15, 2013, 10:06:43 PM
did u choose the proper .hex file ? and u got ant error while compiling ?
Title: Re: Problem trying to flash Rctimer 30A esc
Post by: Shehwar on January 15, 2013, 10:54:21 PM
I chose the tgy.hex file as suggested from the rapidesc database.
And the problem is arising during verification. it is showing mismatch at address 0x00000000
Title: Re: Problem trying to flash Rctimer 30A esc
Post by: deepakkshr on January 15, 2013, 11:16:41 PM
try ESC Flash Tool coz it downloads the latest firmware. so that u can avoid these problems. if u go with avr, there are lot more settings you have to know. generally about the fuse.
Title: Re: Problem trying to flash Rctimer 30A esc
Post by: Shehwar on January 15, 2013, 11:21:13 PM
It says unable to connect to remote server......  :'(  :banghead:
Title: Re: Problem trying to flash Rctimer 30A esc
Post by: deepakkshr on January 15, 2013, 11:39:12 PM
On the right hand side of the Flash tool, u'l see offline settings. check Use cache and choose the hex file. this is used for flashing in offline mode
Title: Re: Problem trying to flash Rctimer 30A esc
Post by: Shehwar on January 15, 2013, 11:46:22 PM
this is the result. :thumbsup:
Thank you so much. :salute: {:)} {:)} :bow: :bow: :bow: :bow:
Title: Re: Problem trying to flash Rctimer 30A esc
Post by: deepakkshr on January 15, 2013, 11:57:15 PM
that's great .. ur welcome  :goodjob:     :hatsoff:
Text only | Text with Images