which type of propellers fit on emax outrunnners?

Started by topalle, July 21, 2015, 11:07:31 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

topalle

July 21, 2015, 11:07:31 AM
I have a Emax 1270 kv outrunner but the prop i purchased doesn't fit as the hole on the prop is smalled than the shaft thickness.

please suggest a prop of 8x4 or 9x4.7
if possible and available on rcbazaar, please post the link.

the motor number is emax GT2210/13
Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator

Rcjabalpur

#1
July 21, 2015, 12:55:13 PM
Just take a reamerm and increase the size.
Hobbico next star | sky surfer V2 | .46 High wing trainer | O.S .46 Ax | O.S .46 La | O.S 55 AX | super tigre .10 motor | Spektrum DX5e | FUTABA 10J | Hitec X4 Eighty | Phoenix Scanner | Multiplex Twinstar ii

Acquiring soon |  no plans as of yet  |

The ultimate responsibility of the pilot is to fulfill the dreams of the countless millions of earthbound ancestors who could only stare skyward and wish.

topalle

#2
July 21, 2015, 01:05:24 PM
what is reamerm?
Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator

Swapnil

#3
July 21, 2015, 01:30:22 PM
I think he meant 'reamer'. It's a tool for increasing diameter of propeller hole.

topalle

#4
July 21, 2015, 01:32:52 PM
Ohh ok.. I dont have one though
Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator

Swapnil

#5
July 21, 2015, 02:03:13 PM
You can use a drill machine but the result may not be as good as with a reamer. You can use similar metallic tools too.
Print
Go Up Pages1
User actions