I am selling my 2 day old ZMR250 Quadcopter build.
It flies great and every part is in perfect condition, just built it 2 days back.
Me and my friend made 2 of these but now we think that they are exactly the same so we are selling one.

The parts are as follows :

Chassis : ZMR250 Carbon Fiber : Rs. 3000
Flight Controller : Naze32 Acro : Rs. 2500
Motors : DYS BE-1806 2300Kv : Rs. 780 x 4 = Rs. 3120
ESC : Emax SimonK 12A : Rs. 750 x 4 = Rs. 3000
Battery : WildScorpion 3S 1500mAh : Rs. 1000
Propellers : GemFan 5030 (1 pair x 4) : Rs. 500
Power Distribution Board : Hobbyking : Rs. 100
LiPo Alarm : 2-4s Lipo Alarm : Rs. 250

Total Cost : Rs. 13070
Selling Price : 12000

EDIT : There is one think I need to clarify.
THIS IS NOT A MICRO QUAD. THIS COMES IN THE CATEGORY OF MINI QUADS.

And there is a huge difference.
This copter is extremely stable and agile.

It is great for acrobatic fliers as it has an amazing thrust to weight ratio.
The motors it uses are really powerful, you can look at the charts here.
http://www.rcgroups.com/forums/showthread.php?t=2180080

As you can see, it gives about 485 grams of maximum thrust, and the all up weight of the copter as you see it is 400 grams, so, there is around 5~4:1 thrust to weight ratio, which is super.

It is great for beginners as it is extremely stable and a charm to fly.
The chassis is all carbon fiber, therefore it can take a lot of crashes.
All you'd have to change are the propellers.

It has super flight time.
On a WolfPack 3S 1500mAh 25C battery, it gives more than 15 minutes of flight time, and the battery is discharged to 3.7v per cell, therefore it can still go a bit more.
Plus I suspect that the battery doesn't have the advertised capacity, therefore it might work better with a better quality battery.

It is great for FPV.
With a full fpv setup and a additional Mobius, it weighs around 500~550 gms, so it still has a lot of power to spare.
Don't believe me?
Look at this video.

NOTE : COMES WITHOUT THE RECEIVER

The ZMR chassis is different from the standard model as the top plate for fpv is not visible in the pictures.Can you uploaded more pictures and flight video...do you have fpv kit as well?

Can you sell the parts separately?

Oh Right.

The chassis shown in the pictures isn't complete, I didn't attach the top plate because I wasn't planning to do fpv for now.
And sorry I don't have a fpv kit.

Here is the picture of the frame with all the accessories.
I'll upload the video in a while.

NOTE : NO PART WILL BE SOLD SEPARATELY.

This price includes shipping ?

The price includes shipping.

Here are the pictures with the top plate installed.

Bump.
Price reduced to 11000.

interested but with out the FC.....plz check PM

Quote from: madaquif on January 29, 2015, 07:55:19 AM
interested but with out the FC.....plz check PM

Replied.

Bump.
And price reduced to 10,500.

Sold to Arun21.
Packed and couriered.

Recieved at my brother place in Bangalore. I may get hold of it in couple of days.

@pushpreet : thread can be moved to completed.