Hi Friends,

I'm putting the flagship of my fleet on sale – my Align 450 L Dominator. 
It is with me in Mumbai
Reason for sale – Making space for new items

Here is what I am running it on (6 cell setup)-

Align 360mm Blue blades, Stock Align tail blades
Align 430M Cyclic servos (micro)
Align 525M tail servo (mini)
Align 1800 KV motor
YEP 60A ESC
Mikado Mini V-Bar Blue
Have put the landing gear from 470L which lifts the tail up while on ground and protects the tail blades

Here are the options on offer-

1.   Kit only with main and tail blades – Rs. 12,000 + Shipping
2.   Kit + main and tail blades + motor – Rs. 14,000 + Shipping (I had bought it in this form @ Rs. 23,000)
3.   Kit + main and tail blades + motor + ESC + Servos + Mini Vbar – Rs. 28,000 + Shipping

For some one opting for option 3 and local pickup, can offer batteries @ Rs. 3500 each.
All batteries have on an average 35 cycles on them, there is no puffing what so ever.
All have T connector on them
I have –
2 X Align 45C 6S 1450 mAh
1 X Turnigy Nano-Tech 35~70C 6S 1300 mAh

I learnt to fly figure8s, circuits and eventually flips and inverted hovers on this heli.
It has a floaty feel in the air and is beginner friendly if tamed down with FBL and dual rates / expo
Canopy took a bit of a damage (paint chipped off on some spots) during a botched landing some time ago but is fixed with Araldite.

Please reply or PM me for any queries.

Cheers

Call 9820881300, Stanley Dsouza , Santacruz , Mumbai

Hi Stanley,

Lets talk over the weekend.

Cheers,
Harshal

Still available 

I could also offer it without the Mini Vbar, then you would need to get a flybarless control unit of your liking-

4. Kit + main and tail blades + motor + ESC + Servos - Rs. 23,000 + Shipping

For this sale i have also installed my brand new Align blue 360 blades and new tail blades.

Will include the spares I have at no extra cost with any of the four options

Here is the list of spares I have-
1) 1 X Main shaft (old one- but is not bent in any way)
2) 1 X Spare screw set
3) 1 X landing skid white (old - which gives a straight stance, not damaged)
4) Main rotor head dampeners - 4 numbers
5) Torque tube rear drive gear set and shaft - 1 number each
6) Torque tube front drive gears - 1 number each
7) Torque tube bearing with silicone rubber housing - 1 number

Cheers !

Bump!

Bump

Hi, I am interested in buying the complete set (BNF) if it still available. I can only bear 10000/- + shipping. Please let me know if you are interested.

Sent from my Mi A1 using Tapatalk

Was sold with option 3 before the last post by newpg202
Locking the thread.