QUAD FRAME, ONE TIME INVESTMENT NO BREAKAGE WORRIES

Started by hemanthtguru, May 16, 2011, 10:02:20 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

hemanthtguru

QUADCOPTER PARTS FOR SALE: LASERCUT IN CLEAR BULLETPROOF ACRYLIC  [ BREAK IT IF YOU CAN ]

Firstly a like to thank DIY DRONES for designing the primary drawings of the plates, but to start with it has the following major improvements: -

1: Material used is bullet proof 5 mm clear acrylic, but the DIY DRONES uses 2.5 regular brittle nylon – breaks easily

2: Battery mount only holds the battery but does not protect it from crashes in the DIY DRONES design , the battery mounts holds and protects that's why it's made of 5 mm plates

3: Motors mount are of 5mm with convertible motor holes, you can use any bolts to mount them.

4: Landing gear design is remarkable improvement, the clearance from ground is high so that you can mount both battery and your camera pan and tilt in the belly of the QUAD itself [ approx. 17cms ]

5: Center dome arms can be engraved with your own text itself [ This requires minimum 3 days ].

6: Iam not providing arms because you can easily cut them with ½ inch by ½ inch aluminum rod which is easily available anywhere in the country, only 4 holes to be made and you are ready to go. This makes replacing the frequently breaking arms a easy task and affordable [ less than 25/- per arm ].

The cad designs for the arms of 30 cm profile can be made easily, just print the PDF document on any sticker sheet and stick on either ends, and drill it with 3mm drill bit.

ONE TIME INVESTMENT FOR ALL YOUR FUTURE QUAD UPGRADES

1.   CENTER PLATE – [ 5 mm PLATES ]  150 /-    [ 2 NEEDED ]

2.   CARRIER BOARD FOR ELECTRONICS – [ 5 mm PLATES ] 100 /- [2 OR 3 DEPENDES ON YOUR ELECTRONICS ]

3.   BATTERY HOLDER [ 5 mm PLATES ] 110 /- [1 NEEDED ]

4.   LANDING GEAR [ 3 mm PLATES ] 35 /-   [ 4 NEEDED , BUT ARRANGEMENT SHOWN IS WITH 8 (PERFERED) ]

5.   CENTER DOME ARC [ 5 mm PLATES ]  20 /- [ 4 NEED WITH CENTER CIRCULAR ]

6.   CENTER PLATES OF DOME ARC [ 5 mm PLATES ]  30 /-  [ COMES IN BACK OF 2 ]

7.   BLDC MOTORS MOUNT [ 5 mm PLATES ] 30/- [ INCULDES UPPER MOUNT AND LOWER GRIP ]

Apart from the above plates, you will need 3mm 8cms M3 bolts and matching nuts. Not included in the package but will be provided on request if you need. And please use nylon spacers for mount electronics and battery plates to maintain a perfect level so the your gyros with be on a level.

Please note:PDF FOR ARM HOLES WILL GIVEN TO THE BUYER, IT TAKES LESS THE 5 mins TO COMPLETE A ARM, WITH ONLY 6 HOLES TO DRILL ON 1/2 AN 1/2 ALUMINUM RODS.
CAN FOUND EASILY,,,, 

:bow:
Multirotor Freak

hemanthtguru

#1
SOME MORE PICS

I WILL SOON MOUNTING THE CENTER DOME ASSEMBLY AND THE CENTER FOR THE DOME ASSEMBLY, AFTER WHICH I WILL UPLOAD THE PICS AGAIN  :bow:
Multirotor Freak

sensationalidiot

***sathish***

hemanthtguru

Multirotor Freak

hemanthtguru

#4
Quote from: hemanthtguru on July 15, 2011, 10:11:49 PM
HI GUYS,

WHEN ASSEMBLED CORRECTLY, WITH WIRES THROUGH THE ARMS YOU CAN GET THE RESULTS AS IN THE PIC BELOW

[Moderator Edit]Please avoid the unnecessary usage of uppercase letters.

This would be better.
QuoteWhen assembled correctly,with wires through the arms you can get the results as shown in the pic below.
Multirotor Freak

CrazyPilot

Sir, What will the price for whole quad frame (with everything)? thx
When you fly electric, fly clean, fly quiet, and fly safe!

hemanthtguru

420 for the frame and 70 rs for the aluminum rod  :hatsoff:

and it needs landing gear 25 rs each u need 4 but i prefer to use 8 for extreme tough frame 
Multirotor Freak

rajsigma

Hai,
I want quad frame but you not resive phone. call on 9845952185

CrazyPilot

Quote from: hemanthtguru on July 15, 2011, 11:28:42 PM
420 for the frame and 70 rs for the aluminum rod  :hatsoff:

and it needs landing gear 25 rs each u need 4 but i prefer to use 8 for extreme tough frame 

Could u please tell the complete product price in one piece like the one in photograph?
When you fly electric, fly clean, fly quiet, and fly safe!

hemanthtguru

do u want even the motor and the controller for ur quad...
Multirotor Freak

CrazyPilot

no only the cost of complete frame w/o motors, escs and CB.
When you fly electric, fly clean, fly quiet, and fly safe!

hemanthtguru

500 rs for the frame with one landing gear on each arm....
Multirotor Freak

CrazyPilot

ok Sir, book one for me with two landing gear on each arm. let me know the full amount with shipping included to NOIDA & provide ur bank details also. Thx
When you fly electric, fly clean, fly quiet, and fly safe!

hemanthtguru

Hi guys news stocks just arrived the total frame cost the 650 + shipping, please order the landing according to your requirements........

5 in stock please contact me on my email.
Multirotor Freak

RotorZone

Hemanth, Please list exactly what is included. The assumption is all the parts mentioned in the first post in the quantities mentioned are included. If it is the complete list, put me down for one too.

Based on my experience, you need to be clearer on what all exactly you are selling and their condition.

hemanthtguru

Multirotor Freak

CrazyPilot

why contact on email when we can deal here? please provide ur bank details. Thx
When you fly electric, fly clean, fly quiet, and fly safe!

anwar

I would also need couple, if it comes with everything shown in the picture with the APM on it.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

hemanthtguru

thanks for the asking anwar sir, the frame is there with APM and also the sonar and the GPS but the APM + upgrades cost around 16,500 only for the control system.

if ur ready to pay the price i can build and produce the frames with APM on it.


Thanks

Hemanth
Multirotor Freak

hemanthtguru

to CrazyPilot

I have no problem dealing here, but the only reason i asked u to contact me on my email is that i can keep a track of our conversation easily. 
Multirotor Freak

anwar

Quote from: hemanthtguru on July 18, 2011, 08:32:50 PM
thanks for the asking anwar sir, the frame is there with APM and also the sonar and the GPS but the APM + upgrades cost around 16,500 only for the control system.

This thread is about the frame.  We all are talking ONLY about the frame.  Please do let me know the price of the frame AS SHOWN on the picture with the APM on it.

And that does mean including all the screws and nuts.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

hemanthtguru

the frame with one carrier plate for electronics cost 640 - landing rs 35 each
Multirotor Freak

CrazyPilot

Quote from: hemanthtguru on July 18, 2011, 08:34:26 PM
to CrazyPilot

I have no problem dealing here, but the only reason i asked u to contact me on my email is that i can keep a track of our conversation easily. 

Sir, If u r the seller then customer preference comes first. i am not comfortable with email communication. i find it easy to type here. hope u get my drift
When you fly electric, fly clean, fly quiet, and fly safe!

anwar

Quote from: hemanthtguru on July 18, 2011, 08:43:06 PM
the frame with one carrier plate for electronics cost 640 - landing rs 35 each

I guess English is a tricky language... so let me try again.  What is the cost of a frame that has EVERYTHING in that picture (except the APM circuit boards) ?  I have no clue what you are calling the "carrier plate" etc mumbo jumbo is... so I am trying to make the requirement as black and white as I can.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

rajsigma

Guru give your bank details , i want one quad frame,8 landing gear,bolt nut and nylon spacer.