RC India

well i have collected lots of useful and useless stuff till now and want to clear my junkyard[since don't have too much space to keep my stuff]

for the first set-
i have 6*li-ion battery 1800 mah[1s3p li-ion used in transistors etc etc discharge-??]
and 6* lead acid accumulator cell of small size [4v output,mah and discharge-??]
and these cells are durable non lasting and easily withstand rough use
u can use it for any purpose u wish
i don't remember the buying rate but anyways these have not  been used[if used at max 2 times that also not full cycle]
and it can easily be charged by any charger[pics given][it takes 4-6 hours to charge and in my test i connected a single ultrabright while led to one li-ion battery and it emitted light for 12hrs brightly and still managed to stay bright for next 12hours before the battery nearly totally drained[toal-24 hrs approx.]
so please help me out clear out my junk
asking price-pm me for price

Thanks in advance
-Ankur

pics

more pics

so does anybody want it????

come on guys!!!

i don't think its totally useless!!

these batteries,under my knowledge are useful!!!

Or no body is interested in taking stuff from me?? ??? ??? ??? :(  :-[ :'( :headscratch: :headscratch: :banghead: :thumbsdown: :violent: :violent:

the 1800 mah li-ion can be used with this (http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=7884) to power recievers and the lead acid one also

Ankur

What did you get these for, in the first place?

not for any specific purpose it can be used for various purposes like testing/running motors,using with leds ,using*2 with my rc boat[my main purpose]etc etc

so does anyone wants it?

since there has been only 1 reply asking a question and not a single demand for it till date i feel like throwing it into the garbage to clear my waste
is it soo useless???

anyone interested??????????

request to admin:
please change the name of the topic to 'selling my stuff ' or so
i was a little sleepy so gave such a bad heading

thankx

Give the prices

Jitender

RS 150 PER BATTERY[of any type]
and rs 125 for charger [each]
shipping extra on actuals
all will be in new [or at max used for 1 cycle of charge and discharge for checking motors]
please confirm
i have a large quantity of them available[abt 20 of each type]
and they can be used as a tx battery when connected in 3s[series of 3]
shipping will be of ur preference

also please tell me if anyone need dc motors[not micro motors-at lease 10-15 gms min and 40 gms  max--all brushed ones
some of them are like this
http://www.tecoelectric.com/image/product/large/spec_sheets/tf_series/TF10C.jpg
most of them like this
http://www.tecoelectric.com/image/product/large/spec_sheets/tr_series/TR500.jpg
some like this
http://www.tecoelectric.com/image/product/large/motor/rf_series/RF330.jpg
some like this
http://www.tecoelectric.com/image/product/large/spec_sheets/rf_series/RF300.jpg

i have another set which has a long shaft

i will post the actual pics and prices soon

i also have 20*sanyo ni-cad rechargeable batteries 1.2v 700mah
brand new unused in poly.. packing
exactly same as this one
http://www.yankeeroo.com/store/product.php?productid=21746&cat=380&page=7
it is actually N3U-BP4 Sanyo 1.2V AA 700mAh NiCd (4pc Pack)
i have 5 packs of them[4*5=20]
search for N3U-BP4 Sanyo 1.2V AA 700mAh NiCd (4pc Pack) and u will find the rates 450-700 rs for a pack of 4
my rate-
each individual cell-rs.100
pack of 4-rs300
pack of [4*2=8]-500
all of them-1200!!!
shipping extra on actuals
please tell me via mail/pm if u need any of the suff

do you have any rechargeable  battery with charger eqavalent to 4 AA cells

Quotemy rate-
each individual cell-rs.150

EverReady NiCd, 700mAH cells are available freely @ 175 for a PACK OF 4!  Sanyo ENELLOOP , 2,000mAH Low Self Discharge - these are their most expensive cells - are available about 700 for 4 nos.

Please do not misunderstand me. This is NOT lowballing  but just to let you know what real, street prices are. This may also help in figuring out the lack of buyer interest.

Admin. You may delete this if considered improper, in any way.

more details-

Product Name:   1.2V AA Nickel Cadmium - NiCd Consumer Cylindrical Cell 700mAh, Sanyo, N3U-BP4
Product Model:   N3U-BP4
Manufacturer   Sanyo
Size   AA
Type   Cylindrical Cell
Technology   Nickel Cadmium (NiCd)
Volts   1.2V
Typical Capacity   700mAh
Height   50mm
Weight   23g
Primary Uses   Cordless Telephone, Walkman, Discman, Toy, Game, Instrument, Ele

see the rates here
http://www.shopwiki.com.au/N700AACL+Sanyo+1.2V+700mAh+NiCd+Short+AA+Battery
http://www.shopwiki.com.au/N3U+(Bulk)+Sanyo+Consumer+AA+Rechargeable+Battery

datasheet-
http://www.simpower.co.nz/shop/images/N3U-BP4.pdf

if u connect 4 in series then out put will be 4.8 v
if u connect 5 in series output will be 6 v[i.e. output voltage of 4 dry cells]
u can charge them via  any charger
or i can give u 4 cell charger for 150[new]

and rates revised-shipping to be paid by the buyer-sorry for mistake

and these prices are lower than what i bought for in my area :) :)

shipping rate can be calculated via-
http://www.firstflight.net/n_dom_rate.asp
each pack is 35 gms approx

new rates of the li-ion and lead acid batteries and charger-
rs100 each[for each battery/charger]+shipping

do u have any recharable battery equavalent to 4AA cells with charger having better runtime than AA cells

these ni-cad  should last longer than a ordinary dry cell[not sure totally]
u can solder them in series of 5 and charge them using any adpater/charger which output a voltage of at least 8v[not accurate-waiting for  seniors to comment]

it can work but i wanted to use it on my truck for powering rx and steering as 4AA cells cant last much longer and also in long run the battery will be economic

Can you get another one with same specification??

i didn't get u
what do u want??
i can give u 5 batteries???

5 batteries will occupy more space than 4AA batteries..........
so can you get a battery having 6v and long runtime on a nitro truck?

ok i'll get one in the evening and tell u
or u can use li-ion /lead acid batteries with some sort of regulator it will be best-lighter and longer runtime!!!

try and get the battries that are used by you before or if you can get a LiPo battery

I'll pay even if it cost more...........



cheers!!!


kartik

i have 4 brand new lipos-1s bare cells--850mah,3.7v,20c discharge
connect them is 2s config for ur purpose

Kartik,i have sent u  a pm(s)
please check it

i went to the person from whom i bought the batteries[ni-cad and lead acid and li-ion] and found out  i was giving u all a very high rate!!
new and revised rates
ni-cad 700mah-rs50/pc
li-ion 1800 mah-rs70/pc
lead acid-rs 80/pc
shipping on actuals

please confirm if u want to buy
u can contact me via pm or email[]

ankur plzz post the batteries with their respective output

voltage-
current-

well i don't know the discharge/mah of most type of batteries
anyways i m posting what i know

lipo:-
1s1p 3.7v 20c 850 mah

li-ion:-
1s3p 3.7v ??c 1800 mah

lead acid accumalator:-
1s1p 4v ??c ????mah[must be between 1500-2000mah]

aa ni-cd
1.2v 1s ??c 700(to 800)mah

will post the pics by today night

i have taken lots of pics but i m felling sleepy so will post the pics tomorrow

here are the pics

these pics are of zippy flightmax 1s 3.7v 10c 138mah lipos

these are of the sanyo 700 mah 1.2v ni-cad aa size batteries

these are of the 1s 3.7v 20c 850mah lipos

these are the pics of the charger[nicd and 9v charger]
output-
ni-cd 1.2v 150mah
&&&
9v 11mah

pics of motors i have will be posted by tonight

all 20 ni-cd batteries have been sold to kartik with a charger and 10*holder[a small plastic case which holds 2*
and 2*lipos[zippy flightmax 1s 3.7v 10c 138mah]
so only 4 lipos of each type are availble now
i can get the ni-cd if anyone is interested the rate will be the same

is anyone interested in buying anything??

Quote from: ankur on March 06, 2010, 03:05:26 PM
these are of the 1s 3.7v 20c 850mah lipos

Ankur can you please upload some clear pics of the lipos...and what is the price for them??? Do they need connectors or they are soldered already?? Which brand are they?? any puffing etc... more info will be helpful. Would be interested in buying three, given an appropriate price.

Regards
Ankur Kaul

they are brand new zippy lipos-bare cells no connectors
i cannot upload more clear pictures as i don't have a good cam-i have taken these using a n73 and this is my best
they have no puffing as they are brand new it the orignal packing
cost is rs.375+shipping for each

anyways will try to post the new pics tomorrow of the 1s lipo[850mah] hope that would be clear since i plan to snap it outdoor rather that at 12 midnight as i did for these i have posted

Quote from: ankurkaul17 on March 07, 2010, 11:33:10 PM
Would be interested in buying three, given an appropriate price.

Regards
Ankur Kaul

are u interested in taking them??

Quote from: ankur on March 08, 2010, 03:44:13 PM
are u interested in taking them??

I guess no..as i will be paying approx Rs 1200-1300 for a 3s 11.1 V 850 mah pack that too without connectors. I mean i can get a 11.1 V 1000 mah lipo for that price at my LHS.

Anyways thanks for your time.

Regards
Ankur

from which lhs can u get 11.1 V 1000 mah lipo for rs 1200??

11.1v/1000mah/15c
Rs.1090 + 60

with rcforall.

i am not selling my 1s 850 mah 20c batteries
please tell me if u want anything else

ok since some members of this forum are not liking my sudden withdrawl of the offer i m  ready to sell the batteries[zippy 1s 850 mah 20c] again at a lower price-325/pc + shipping
i will be posting new and more detailed pics in 1/2 hr.

here are some more detailed pics of the 1s 850mah 20c lipos
and if u buy all the 3 lipos,shipping is free

and these pics are of the charger with batteries to confirm both work

ok dude seen it

got

Quote from: ankurkaul17 on March 07, 2010, 11:33:10 PM

Quote from: ankur on March 06, 2010, 03:05:26 PM
these are of the 1s 3.7v 20c 850mah lipos

Ankur can you please upload some clear pics of the lipos...and what is the price for them??? Do they need connectors or they are soldered already?? Which brand are they?? any puffing etc... more info will be helpful. Would be interested in buying three, given an appropriate price.

Regards
Ankur Kaul

just got the things today only its in great condition only one motor is damaged which i think i can repair, both the lipos are fine no puffing etc now just need a charger ........ that too has been ordered to ankur....hope he sends it soon ;)

Regards


kartik

I'm interested in  "6*li-ion battery 1800 mah" (4nos.) what will be the final price with shipping for this pack(4nos.).

PM sent  :o

payment made + PM but still not received package from YOU.

Still no reply from YOU.

sunte ho anwar bhaiyaa.... ???
I'm very new bee in this forum & it's my first transaction with old member of this forum.
there is  too delay to complet the transaction by ANKUR.

Hi!
Ankur!
     till Today I'm waiting for Your reply, but in vain & compell me to expose my PM to YOU in open forum board  as under. :banghead:

Hi! Ankur !
Transfer of amount is done on 30th june,2010 & Today is 1st august,2010. 
Still there is no response or delivery from Your side.I hope YOU also consider this fact. Now only alternative is remain for me is to beg my amount from YOU.  .
Waiting for transfer of amount to my bank account from your bank account.
Thanks.
Pawar.

did u take the ankur phone number and tried to contact him

Although Dinil's suggestion is very valid, I am requesting third parties to not comment until Ankur responds :)

I doubtfull ...about ankur.....he must be busy with his studies...that's why he is not comming online......he is giving his 10th this year so...he must be busy with preparations......will try to help....but i can do that only after this month..because i am also having my exams

Hi!
Dinil,Anwar,Akky!
O.K.
Thanks for reactions.....I got PM from Ankur today & waiting for parcel send by Ankur which will arrive on 14/08/2010 as per online calculator of firstflight.

Ankur:
Wish YOU Best of Luck in Advance for Board Exam.