I have following items for sale:

1. HK X230 xcopter Rs.3200 + shipping http://www.hobbyking.com/hobbyking/store/__26587__X230_Mini_Quadcopter_Combo_w_Motors_ESCs_Propellers_.html
With all stock motors, ESCs, Power distribution board. I have changed original 2.5mm male bullet connectors of ESCs to 3.5mm bullet. Original props broke during testing. So I have put GWS 5030  with ring adapters stuck in shaft hole. 

2. HK V2.1 Atmega168PA multirotor control board Rs.850 + Shipping http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=19534

3. 3S1300mAh 25-50C Turnigy nano tech batt. Rs.600+ Shipping http://www.hobbyking.com/hobbyking/store/__11903__Turnigy_nano_tech_1300mah_3S_25_50C_Lipo_Pack.html
The batt. has gone through 6 charging cycles.

4. XT60 to 4 X 3.5mm bullet Multistar ESC Power Breakout Cable . Rs.175 + shipping http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=25480

5. USPASP AVR programming cable  Rs. 350 + Shipping http://www.rcelectro.com/usbasp-avr-programming-device-for-atmel-proccessors

Note:
1. I have done some modification on the b/o cable. Please see the picture.
2. Screwheads of stock screws have lost their coating due to humidity
3. One stock screw has been lost and is replaced with equivalent screw.
4. Please see the pictures and video

The reasons for the sale:
Despite many attempts I am not able to get it off the ground. May be I do not know enough. I had put this on sale earlier but did not close it as I suddenly got busy.


Regards

Vishwas

Video clip: Regret awful orientation

Sold...