Hiller 450 Sport Helicopter Kit | Turnigy Radio | Electronics | Spares | Tools

Started by raja_mastana, February 26, 2012, 10:00:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

raja_mastana

Hiller 450 Sport Kit Only 3200/-

Electronics
3 x Micro Cyclic Servos : 920/-
1 x Mini Rudder Servo : 780/-
1 x AV3800 Brushless Motor : 920/-
1 x Avionic 40 AMP ESC : 1300/-
1 x AV401 AVCS Gyro : 1120/-

Heli Building Tools
Training Kit 239/-
Blade Balancer 405/-
Pitch Gauge 108/-
Swashplate Levelling Tool : 225/-
Hex Drivers : 650/-
Ball Link Plier : 450/-

Lipo Battery Packs
Zippy 2200 3S1P 40C : 770/-
RCBazaar 3S1P 2200 20C : 860/-

Misc Items
Velcro stick and peel : 324/-
Double Side Tape : 50/-
Scorpion Battery Strap : 324/-
Heat Shrink Tubes 5/6/7mm : 60/-

Spares
Screws set : 100/-
Feathering Shaft : 20/- (Qty 2 available)
Tail Blades : 20/-
Main Shaft : 25/- (Qty 2 available)
Belt : 40/- (Qty 2 available)
Tail Shaft : 30/-
Tail Boom : 30/- (Qty 2 available)
Skids : 30/-
Flybar : 25/-
Linkage rod set : 115/-
Autorotation Gear Set : 30/-
Wood Blades : 110/-
Fiberglass Blades : 225/-

Total : 13,620/-
Package Deal : 13,200/-

*Shipping @ actual*
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

raja_mastana

The sale is for a friend - Muzammil. He has got busy with work and unable to spare time for RC - hence the sale.

Only few build/trial flights have been made on this heli, its as good as new
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

raja_mastana

Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware)

Includes
Turnigy 9X 9Ch Transmitter w/ Module
8 ch Receiver
Bind Plug
ZIPPY Flightmax 1800mAh 9.9V LiFe Battery Pack
Turnigy 9X LCD Backlight Kit - Blue
Flysky 6 ch Receiver x 2

Price :  :Rs: 7200 + shipping
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

raja_mastana

Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories
Price :  :Rs: 1800

HXT900 9g / 1.6kg / .12sec Micro Servo x 3
Price :  :Rs: 650
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

get_sat

Hi

I would like to buy these if your selling separately

Training Kit 239/-
Blade Balancer 405/-
Pitch Gauge 108/-
Swashplate Levelling Tool : 225/-
Ball Link Plier : 450/-

raja_mastana

ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

trotro_fly

hey i want
Turnigy 9X 9Ch Transmitter w/ Module
8 ch Receiver
Bind Plug
ZIPPY Flightmax 1800mAh 9.9V LiFe Battery Pack
Turnigy 9X LCD Backlight Kit - Blue

aviator


raja_mastana

ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

raja_mastana

Stock status

Hiller 450 Sport Kit Helicopter with Electronics
Electronics Included
3 x Micro Cyclic Servos
1 x Mini Rudder Servo
1 x AV3800 Brushless Motor
1 x Avionic 40 AMP ESC
1 x AV401 AVCS Gyro
1 x 242 Loctite
1 x Lipo Bag
4 x Heat Shrink Tubes (30cm long)
Total :  :Rs: 8240/-

Heli Building Tools
Training Kit 239/-
Blade Balancer 405/-
Pitch Gauge 108/-
Swashplate Levelling Tool : 225/-
Ball Link Plier : 450/-

Hex Drivers :  :Rs: 650/-

Lipo Battery Packs
Zippy 2200 3S1P 40C : 770/-
RCBazaar 3S1P 2200 20C : 860/-


Misc Items
Velcro stick and peel : 324/-
Double Side Tape : 50/-
Scorpion Battery Strap : 324/-

Spares
Screws set : 100/-
Feathering Shaft : 20/- (Qty 2 available)
Tail Blades : 20/-
Main Shaft : 25/- (Qty 2 available)
Belt : 40/- (Qty 2 available)
Tail Shaft : 30/-
Tail Boom : 30/- (Qty 2 available)
Skids : 30/-
Flybar : 25/-
Linkage rod set : 115/-
Autorotation Gear Set : 30/-
Wood Blades : 110/- (Qty 4 available)
Fiberglass Blades : 225/-

Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver | LiFe battery Pack | Blue Backlit
Includes
Turnigy 9X 9Ch Transmitter w/ Module (Mode 2) (v2 Firmware)
8 ch Receiver
Bind Plug
ZIPPY Flightmax 1800mAh 9.9V LiFe Battery Pack
Turnigy 9X LCD Backlight Kit - Blue
Price :  :Rs: 6000/-

Receivers 6 Channel
Flysky 6 ch Receiver (New) :  560/-
Flysky 6 ch Receiver (Sparingly Used) : 500/-

Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories
Condition : Almost New (Used just once)
Price :   :Rs: 1800

HXT900 9g / 1.6kg / .12sec Micro Servo x 3
Condition : New
Price :   :Rs: 650

*Shipping charges at actual*
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

nishikanth

hey i need the turnigy transmitter can i get more photos of the transmitter...n can u send the parts to hyderabad within 2 or 3 days as im ver urgent in ned of it
 

raja_mastana

Quote from: nishikanth on March 06, 2012, 11:09:54 AM
hey i need the turnigy transmitter can i get more photos of the transmitter...n can u send the parts to hyderabad within 2 or 3 days as im ver urgent in ned of it
 
Sure, i can provide more Hi-res pics. Just PM me your email ID.
Regarding delivery time taken, I cannot give a definate date - only estimate.

I can ship by Bluedart/Aramex/TNT/SpeedPost (shipping cost at actual)
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

raja_mastana

ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

akumar40


sbajare

Sandeep Bajare
Ph - 9175342600

raja_mastana

Hi,
Yes Turnigy Accucel is available.
(All items mentioned in Reply #9 are available)
Thanks
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

sbajare

hi,

book the accucell for me. will arrange payment.

pm me bank details

regds
Sandeep Bajare
Ph - 9175342600

raja_mastana

ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

raja_mastana

Stock status with revised prices

Electronics for 450 Size Helicopter (all purchased from RCBazaar)
3 x Micro Cyclic Servos (Model - 90MG) : 920/-
1 x Mini Rudder Servo (Model - D590) : 780/-
1 x AV3800 Brushless Motor : 920/-
1 x Avionic 40 AMP ESC : 1300/-
1 x AV401 AVCS Gyro : 1120/-

Heli Building Tools
Hex Drivers :  Indian Rupees 620/-

Misc Items
Velcro stick and peel : 324/-
Double Side Tape : 50/-
Scorpion Battery Strap : 324/-
1 x 242 Loctite 10ml : 50/-
4 x Heat Shrink Tubes (30cm long)

Spares
Screws set : 50/-
Feathering Shaft : 20/- (Qty 2 available)
Tail Blades : 20/-
Main Shaft : 25/- (Qty 2 available)
Belt : 40/- (Qty 2 available)
Tail Shaft : 30/-
Tail Boom : 30/- (Qty 2 available)
Flybar : 25/-
Linkage rod set : 115/-
Autorotation Gear Set : 30/-
Wood Blades : 110/- (Qty 4 available)
Fiberglass Blades : 225/-

Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver | LiFe battery Pack | Blue Backlit
Includes
Turnigy 9X 9Ch Transmitter w/ Module (Mode 2) (v2 Firmware)
8 ch Receiver
Bind Plug
ZIPPY Flightmax 1800mAh 9.9V LiFe Battery Pack
Turnigy 9X LCD Backlight Kit - Blue
Price :  Indian Rupees 5500/-

Receivers 6 Channel
Flysky 6 ch Receiver (New) :  540/-
Flysky 6 ch Receiver (Sparingly Used) : 480/-

HXT900 9g / 1.6kg / .12sec Micro Servo x 3
Condition : New
Price :   Indian Rupees 650

*Shipping charges at actual*
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

raja_mastana

Stock status

Electronics for 450 Size Helicopter (all purchased from RCBazaar)
3 x Micro Cyclic Servos (Model - 90MG) : 920/-
1 x Mini Rudder Servo (Model - D590) : 780/-
1 x AV3800 Brushless Motor : 920/-
1 x Avionic 40 AMP ESC : 1300/-
1 x AV401 AVCS Gyro : 1120/-

Misc Items
Velcro stick and peel* : 324/-
Double Side Tape* : 50/-
Scorpion Battery Strap : 324/-
1 x 242 Loctite 10ml* : 50/-

Spares
Feathering Shaft : 20/- each (Qty 2 available)
Carbon Fiber Tail Blades : 120/- each (Qty 3 available)
Main Shaft : 25/-
Belt : 40/- each (Qty 3 available)
Tail Boom : 30/-
Wood Blades (RCBazaar): 80/-
Wood Blades (HobbyKing) : 110/- each (Qty 3 available)
Fiberglass Blades (RCBazaar) : 225/-

HXT900 9g / 1.6kg / .12sec Micro Servo
Condition : New
Price :   Indian Rupees 650 (for set of 3 servos)

Shipping charges at actual
*reserved
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

zoheb_mech

Hi...actually m in urgent need of 3 stuffs...for my new heli...

1.Mini Rudder Servo (Model - D590)
2.Avionic 40 AMP ESC
3.AV401 AVCS Gyro

so do you have these stuffs til nw...

raja_mastana

ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

VC

Wood Blades (RCBazaar): 80/-
1 x AV3800 Brushless Motor : 920/-
Belt : 40/- each (1 unit)
Tail Boom : 30/-
Feathering Shaft : 20/- (1 unit)
Tail Blades : 20/-
Main Shaft : 25/- (1 unit)

Please let me know if the above are available.

Regards.
Growing old is mandatory, growing up is optional!

raja_mastana

VC, Tail blades are sold out, rest all the items you mentioned are available.

However, 62mm Carbon Fiber Tail Blades are available (as mentioned in Reply #19)
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10829
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

VC

Please block the rest for me and let me have your bank details and total payment to be made.

Regards.
Growing old is mandatory, growing up is optional!