1) Carbon Fiber Rod (solid) 2.5x750mm
Price: Rs100 Per Piece

2) Carbon Fiber Rod (solid) 2.0x750mm
Price: Rs80 Per Piece

3) Carbon Fiber Square Tube 750x6mm
Price: Rs200 Per Piece

4) Evotite CA460 Foam Safe Super Glue (Medium) + Applicator (X Long)

Price: Rs400

5) Turnigy 5A (8-26v) SBEC for Lipo

Price: Rs310

6) HXT500 5g / .8kg / .10sec Micro Servo

Price: Rs250

7) Flat 26AWG servo wire(R/B/W)

Price: Rs10 Per CM

Servo Terminals (Futaba) Gold Plated

Price: Rs25 Per Pair

9) Receiver Switch (3 plug)

Price: Rs130

10) Turnigy Servo Tester

Price: Rs500

11) Pin Horn 9x13

Price: Rs15 Per Peice

12) Nylon Clevis 2x29mm

Price: Rs10 Per Piece

13) AX 1806N 2100kv Brushless Micro Motor (19g)

Price: Rs700

14) Prop Saver 3.17mm

Price: Rs150 Per Piece

15) HXT 4mm Bullet Connector With Housing

Price: Rs30 Per Piece

16) Hobby King 2.4Ghz 6Ch Tx USB Cable

Price: Rs250

17) Battery Monitor 2s

Price: Rs200

18) Prop Adaptor 3.17mm

Price: Rs200

19) Ultra T Plugs

Price: Rs40 Per Pair

20) Futaba/JR Connector caps

Price: Rs30 Per Piece

21) CUSTOM LENGTH SERVO WIRE
Price: Rs29 Per INCH

22) HXT900 9gram Servo

Price: Rs195

CA 460 is fantastic stuff! I am so glad that Anam got it for me. Works wonders on Depron.

Anam bhaiyya, I have sent you a PM..

Quote from: VC on August 18, 2010, 12:02:20 AM
CA 460 is fantastic stuff! I am so glad that Anam got it for me. Works wonders on Depron.

VC sir, what is the difference between this and the normal CA? Is this the foam safe type of CA? Oh that reminds me.. does Araldite react with thermocol?

No. Araldite is safe with Thermocole or Depron/Biofoam. However, it takes 24 hours to cure and harden.

This stuff (CA 460) cures and hardens in half a minute and can be used on Thermoocole/ Depron. Normal CA ( Feviquik etc) will destroy foam.


VC

Araldite should not be used because it adds on to the weight as well.

Thanks a lot for the info guys.. Cause I wanted to glue a wooden spar into a thermocol wing.. Which would be the most appropriate glue for this? I have only 3 options.. Araldite, Fevicol & hot-glue. The CA460 is a bit out of my budget at the moment..

mecineman.....use bond tite fast and clear....that best thing i have come accross settles in fives minutes and achives full strength in an hour...cost one box. Rs 60...a very goood thing
Its beter than araldite, fevicol and hot glue...
else it ur own choice...

Thanks Akky.. will try it..

Try fevitite Rapid 5 Minutes epoxy. Costs Rs30 for 13gm from Pidilite Makers of fevicol.Very useful glue for foams and wood.

One of the best, fast setting, epoxies is ARALDITE KLEAR. It starts to set in about 2 minutes max. and has incredible strength. I do not use 30 min. epoxy any more. Prefer to mix a small quantity for each joint, every time.

Quote from: anam_funny on August 17, 2010, 11:48:21 PM

7) Flat 26AWG servo wire(R/B/W)
Price: Rs10 Per CM


21) CUSTOM LENGTH SERVO WIRE
Price: Rs29 Per CM

That's 1,000 & 2,900 per metre, respectively!! Surely something's wrong here.

I have sent you a PM.

yes. that was supposed to be an inch. yes. my mistake. sorry... thank you for pointing that out.

IMPORTING ARF KITS ON REQUEST ALSO... CUSTOMS, MY RESPONSIBILITY...[/U]

can u import a tx/rx beacuse i need one

yup...

Quote from: anam_funny on August 18, 2010, 11:25:00 PM
IMPORTING ARF KITS ON REQUEST ALSO... CUSTOMS, MY RESPONSIBILITY...[/U]

Only from HobbyKing or from elsewhere too?

Quote from: VC on August 18, 2010, 11:42:22 PM

Quote from: anam_funny on August 18, 2010, 11:25:00 PM
IMPORTING ARF KITS ON REQUEST ALSO... CUSTOMS, MY RESPONSIBILITY...[/U]

Only from HobbyKing or from elsewhere too?

currently on only from HK because it is very easy for me to interpret the working of HK.

how much do you charge in means of percentage??

Anam,

Would you have 4 pcs of HXT500 readily available? If yes, then I would like to have them. Also I would like to have the small horns x 5. Let me know the shipping to Mumbai. Please PM me. You may reach me at +919004548889. I would prefere HDFC bank transfer.

Regards,
Saurabh.

Hi,

   I am interested in HXT900 9gram Servo in need 2 of them.Can you tell me the shipping to Hyderabad and the servo horns are included?Do you have any metal gear servos of the same size?

kalyan

Hi Anum,
I am interested in the HXT 4mm Bullet Connectors. The price of Rs.30.00, is it for one set of male and female connectors with housing or otherwise ?. I would be needing 5 sets. Please clarify.
Regards

Rao.

HXT500 & PIN HORNS SOLD

items delivered on time
thank you
regards
Rajaram
09845069090

QuoteReceived Servos HXT900 * 8 pcs
however SERVO HORNS are missing...  
Thank you.

Hi Anam,

Sorry for the confusion. I am yet to receive the parcel. The servos that I was talking about was from another seller... not you.. Sorry for the confusion buddy... I will confirm once I get your parcel. Please send the POD.