Print Page - Motors , Metal Gear servos, ECS, props

Title: Motors , Metal Gear servos, ECS, props
Post by: akky on May 17, 2011, 08:00:29 PM

Hextronik MG-14 14g/2.2kg/0.11sec aircraft servo
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8303
2 available :Rs: 650 each

Turnigy C35-30 1400kv Bell Motor 30A
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5244
1 available :Rs:750

FC 28-22 Brushless Outrunner 1200kv
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5354
1 available :Rs:450

TowerPro H40A Brushless Speed Controller
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9299
1 available
:Rs:950

Turnigy AE-30A Brushless ESC
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11617
1 available
:Rs:900

GWS EP Propeller (RD-8043 203x109mm) (6pcs/set)
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10048
:Rs: 430

Note: the above prices are fixed so no negotiations or offers .. All listed prices are exclusive of shipping...
getting out of flying so selling the above things

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: AEROVISHWA on May 17, 2011, 11:08:32 PM

buddy can u make me a combo i told u about from this....!!!

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: vishwasvm on May 18, 2011, 07:25:56 AM

Quote from: akky on May 17, 2011, 08:00:29 PM
getting out of flying so selling the above things

Dont quit flying....

Vishwas

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: anwar on May 18, 2011, 08:52:19 AM

Getting out of flying ? New job ? :)

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: akky on May 18, 2011, 12:31:46 PM

no new job sir ...its time for me to leave :thumbsup:

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: akky on May 20, 2011, 02:22:38 PM

Bump

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: azhaguvel on May 20, 2011, 03:46:54 PM

Akky dont quit :(.

If you want to sell these go down on the prices. price are higher then the actuals provided these are not hard to get and faces no custom issues.

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: akky on May 24, 2011, 08:06:41 PM

some revisions done in prices of some products

Hextronik MG-14 14g/2.2kg/0.11sec aircraft servo
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8303
2 available Indian Rupees 600 each

Turnigy C35-30 1400kv Bell Motor 30A
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5244
1 available :Rs:730

FC 28-22 Brushless Outrunner 1200kv
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5354
1 available :Rs:430

TowerPro H40A Brushless Speed Controller
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9299
1 available
:Rs:920

Turnigy AE-30A Brushless ESC
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11617
1 available
:Rs:890

GWS EP Propeller (RD-8043 203x109mm) (6pcs/set)
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10048
Indian Rupees 400

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: akky on May 25, 2011, 03:36:21 PM

bump

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: gauravag on May 25, 2011, 03:43:32 PM

lol you cannot leave once you have been there :) cheers

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: akky on May 25, 2011, 04:26:03 PM

i am leaving electrics....and not flying

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: akky on May 26, 2011, 01:27:15 PM

bump

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: anam_funny on May 26, 2011, 10:13:07 PM

Quote from: akky on May 17, 2011, 08:00:29 PM
Note: the above prices are fixed so no negotiations or offers .. All listed prices are exclusive of shipping...
getting out of flying so selling the above things

what happened to your getting out of flying...??

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: akky on May 26, 2011, 10:14:43 PM

not leaving flying....I am planning to get into glows so collecting funds for it
no other way to get funds now

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: anam_funny on May 26, 2011, 10:16:24 PM

So you should not have purchased these items from HK.... I think these are all new... aren't they?

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: akky on May 26, 2011, 10:17:37 PM

i purchased only 3 things from the above listed things from HK
that too 2 months ago

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: anam_funny on May 26, 2011, 10:19:34 PM

So are they used?

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: akky on May 26, 2011, 10:21:54 PM

naah

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: akky on May 31, 2011, 11:19:09 PM

bump

Title: Re: Motors , Metal Gear servos, ECS, props
Post by: akky on June 02, 2011, 09:36:27 PM

bump.. Combo price for all above listed things...is rs 4300
and free shipping

RC India

RC Baazar => For Sale => For Sale - Completed => Topic started by: akky on May 17, 2011, 08:00:29 PM