Hey guys...

Tx Battery for sale...

Turnigy 2650mAh 3S 1C LLF Tx Pack (Futaba/JR)

http://www.hobbyking.com/hobbyking/store/__16529__Turnigy_2650mAh_3S_1C_LLF_Tx_Pack_Futaba_JR_.html

Wanted Price is similar to HK--------- Rs. 850 + Shipping as Actual  (Rs. 850 is the price at which it came into my hands)

Attached here are the pics of the Battery. I purchased it to fit this into my Fly Sky 6 Channel Radio and As it turned out that its not of the size.... (Newbie blunder...!!)     

The JR/Futaba plug was changed due to its unavailability in my radio... I am under the process of making a Quad and then I ordered a 1450 mah battery compatible to my radio....

And Its obvious that I could not use this battery even once because where could I use it with nothing to fly...? 

Hi,

Will this Battery fit into Turnigy 9 Ch Tx??

If yes i am interested. can u post post more pictures showing it is not swollen or anything?
And also voltage on multimeter if possible?

Hope these will do... Tell me if u need anything... My multimeter is crashed at the moment... I f u r willing to have voltage too then will arrange it...

Need to check dimentions before you confirm , will it fin in turnigy 9x ?

Also wait for experts .

Today only I have ordered "HobbyKing 1500mAH LiFe 3S 9.9v Transmitter pack."
you can check my buddy code on Live buddy code post or order from LHS http://hobbysea.com/products.php?129
Two reasons for ordering this :
# having concern about volt fully charged lipo it's 12.6 (not sure wether T9 have fuse in it and don't wanted to destroy it.)
# after reading reviews on site thats it fits and works well on T9

Thanks VinayakR,

The two additional things that i have asked to seller are the lesson taken from your last battery case.

Also i have not received my Radio (In transit) yet so cant confirm the dimentions so any expert advice is welcome. 

Hey guys..

Unfortunately I couldn't get the picture of the voltage because I had got Analog multimeter which showed 12 V. Don't worry for your satisfaction I will get the reading clicked on a digital one in my college and upload it tommorow...

Thankyou...

Quote from: poporing2 on August 16, 2012, 08:55:22 PM
can u post post more pictures showing it is not swollen or anything?....

i have asked to seller are the lesson taken from your last battery case.

Good one !! Nice to see some how it's helping peoples

- I feel it should fit the T9X. @Adiboy, worthwhile to post the dimensions as well
- The 12.6v will heat up the radio quite a bit but no damage. The LiFe is a better choice as the heat build up is considerably less and still stays in the good voltage range (the transmitter doesn't beep about low battery) but the upside is that this one surely gives more flights

AdiBoy. just rechecked your post, you have removed the Futaba connector, I need one for a Futaba Tx, Do you still have the spare connector with you btw?

Thanks Girish,

For your valuable advice, i don't want to push voltage regulator on my Radio to their limits 

@Adiboy - Sorry about it, but i will drop from this deal.


Thanks

Aditya is this battery compatible with this radio http://www.hobbyking.com/hobbycity/store/__8992__Turnigy_9X_9Ch_Transmitter_w_Module_8ch_Receiver_Mode_2_v2_Firmware_.html

@popring2, You got me absolutely wrong there. The heat is more but not enough to damage your LVR. In any case, your regulator is more durable than the physical attributes of the Tx itself. You will end up losing the screws of the Tx before the voltage regulator , so no reason to cancel your deal. Bear in mind the following consequences as well:

1) The Lipo tha @Adi is selling will give you more flights before a charge is required than the LiFe
2) You will need to buy a separate charger for the LiFe, they cannot be charged using a standard LiPo charger.

So do reconsider your decision.

Thanks
GS

Oh thanks Girish,

http://www.hobbyking.com/hobbyking/store/__7028__Turnigy_Accucel_6_50W_6A_Balancer_Charger_w_accessories.html
Can above charger be used to charge LiFe battery? i am sure this charger can be use to charge the battery Adiboy is selling.

Thanks.

Yes Accucel 50W is a good charger for charging NiCd, NiMH, LiPo, LiIon, LiFe and Pb batteries.
The charger comes with a deans plug and alligator clips only so you will have to invent a solution for connecting it to the LiFe battery or the Lipo.


You will also need a 12V atleast 2A supply for this charger to be able to charge at a good rate. It does not come with a PSU.

Girish,

Thanks for the clarification and feedback on charger, i am aware of PSU not being included and have some at home which can be put to use.

Aditya - PM me bank details


Thanks

Hey guys...

Had a hectic day at college followed by lousy internet connection    so couldn't update anything....
Finally it is under control...

@Girish sir

The dimensions of the battery are 10 x 3 x 2.5 cm... and yes I am left with that Futaba connector but Have to search for it... If u really need it I will do the drill....

@Satya Sir

I am really sorry... I am unaware of that fact... 

@poporing2

Here is the pic of the battery with voltage.... Please confirm then will PM u the Bank details...

Thankyou guys for bearing with me...

Booked for poporing2....

DEAL CLOSED

Payment done.     

waiting for you to ship the battery.

Thanks Payment Received...

Also Battery Shipped...

Hi,

Nicely packed Turnigy 2650mAh 3S 1C LLF Tx Battery Pack received. 

Thanks, looking forward to deal with you again.   

Thanks... It was nice hearing from you...