Hello All,
www.RcHobbyAddict.com has launched a combo for 450 Size Electric Helis.

Price: Rs4450

Please let me know what you think about the price and the individual items included.

Product Page: http://rchobbyaddict.com/product_info.php?products_id=157

List of items included with specifications:
Includes:
3 x HXT900 9g / 1.6kg / .12sec Micro Servo
1 x Turnigy 450 H2218 Brushless outrunner 3550KV
1 x TowerPro H40A Brushless Speed Controller
1 x Turnigy MG90S Metal Gear Servo 1.8kg / 13.4g / 0.10sec
1 x HK401B AVCS Digital Head Lock Gyro
1 x Turnigy 2200mAh 3S 20C Lipo Pack
1 x XT60 Male Plug
1 x 3.5mm 3 wire Bullet Connector for Brushless Motor
1 x HK450 size Pinion Gear 3.17mm/11T (Align part # HZ052)


Specifications for "HXT900":
Size: 21x12x22 mm / 0.74x0.42x0.78 in
Voltage: 3v ~ 6v
Weight: 9g / 0.32oz
Speed: 0.12 sec/60(4.8V)
Torque: 1.6 kg-cm
Working Temp: -30C~60C
Teflon Bushing, 15cm wire, coreless motor
Servo arms & screw included


Specifications for "Turnigy 450 H2218 Brushless outrunner":
Turns: 3.5
Cells: 2~3S
Kv: 3550rpm/V
No load Current: 4.7A/10V
Max power: 500W
Weight: 67g
Dimensions: 27.2 x 36.5mm


Specifications for "TowerPro H40A Brushless Speed Controller ":
Amp rating: 40A
Burst Rate (15sec): 50A
BEC Current: 1.5A
Voltage: 7.4-11.1V (2-3 cell Lipo/5-10 NiMH,NiCd)
Dimensions: 70x31x11mm
Weight: 47g


Specifications for "Turnigy MG90S Metal Gear Servo":
Weight: 13.4g
Dimension: 22.8*12.2*28.5mm
Stall torque: 1.8kg/cm (4.8V) - 2.2kg/cm (6.0V)
Operating speed: 0.10sec/60degree(4.8v) - 0.08sec/60degree(6.0V)
Operating voltage: 4.8-6.0V
Temperature range: 0- 55deg
Servo Plug: JR (Fits JR and Futaba)


Specifications for "HK401B AVCS Digital Head Lock Gyro":
Digital proportional RIC system
Operating voltage: 4.8V ~6V( common for receiver)
Operating temperature: -lOL r-.rf-45 C
Dimensions: 28x26x20 mm
Operating current: 80mA


Specifications for "Turnigy 2200mAh 3S 20C Lipo Pack":
Minimum Capacity: 2200mAh (True 100% Capacity)
Configuration: 3S1P / 11.1v / 3Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 185g
Pack Size: 103 x 33 x 24mm
Charge Plug: JST-XH
Discharge Plug: XT60

the combo is superb...!!

just let us what we will be requiring in addition to the heli and these parts to get it  up in air...??

I guess you need a Helicopter & Radio

Nothing... Just a heli kit...

If you are a complete beginner, then the following will be required:
1pcs of 1.5mm Hex Screwdriver
1pcs of 2.0mm Hex Screwdriver
1pcs of #1 philips screw driver
1pcs of "BLUE" Thread Lock
1pcs of Lipo Charger
1pcs of 6Ch radio
1pcs of 450 Size Heli Kit, which can be found here:
http://rchobbyaddict.com/product_info.php?cPath=49&products_id=127

I am not sure if you refer to the "red" threadlock as the color of the liquid itself, OR the bottle.  But "red" loctite (color of the liquid) is typically permanent, and not recommended for such builds.  The "blue" colored or semi-permanent ones are the recommended ones. If you use the permanent one, you are in for long hours if you ever have to do crash repair etc.

I was refering to the colour of the liquid. Oh. Ohk. I have always used green... Sorry for that. I will correct that.