Hello Aeromodellers !!

I have the following items for sale
reason : Had a workshop , ordered extra
All the items are ordered through DHL and Speed Post  , hence prices may be a bit more
All the items are brand new and sealed.
All the prices are in INR
An invoice will be sent along with the shipment.

1)   ESC - FLY PRO Seires 25A 2-4S Brushless Speed Control
     Cost per piece - 700
     Quantity Available - 3
     Shipping - 50

2)   Motor - 1000KV Outrunner Brushless Motors W/ Prop adapter Type A2212/13
     Dimensions:27.5x30 mm
     Shaft diameter: 3.17 mm
     Weight:47 g
     Thrust : 1200gms
     
     Cost per piece - 750
     Quantity Available - 3
     Shipping - 50
     

3)   Servo - CORONA 12.5g/ 2.5kg/ .14 sec Metal Gear Micro Servo
     Size:   22.5X11.5X24.6mm(0.88"x0.45"x0.96")
     Weight:   12.5g
     Operating voltage:   4.8V~6.0V
     Operating speed:   0.14sec/60º
     Stall torque:   2.5kg.cm
     Gear Material:   Metal
     Connector wire length:   215mm
     Temperature:   -20℃～+60℃

     Cost per piece - 450
     Quantity Available - 8
     Shipping - 50

4)   Charger - Turnigy 2S 3S Balance Charger. Direct 110/240v Input
     This charger is better then the iMax Pro according to my personal experience.
     got a full lot of 25 iMax Pro chargers which were not working.

     Cost per piece - 850
     Quantity Available - 4
     Shipping - 50

5)    Battery - ZIPPY Compact 1800mAh 3S 25C Lipo Pack
      These LiPos are really very slim and compact at the same time very efficient.
      Weight: 134g (including wire, plug & case)
      Dimensions: 106x17x34mm
      Balance Plug: JST-XH
      Discharge Plug: XT60
     
      Cost per piece - 900
      Quantity Available -3
      Shipping - 50

Hello respected modeller,could you please post the actual pics,individually,of the items you wish to sell. And please confirm that they are brand new and in unused condition.

Thanks for the reply.

The items are brand new, packed and absolutely unused.

I will upload the individual pics in a few minutes.

Individual Pics

will post the charger's pic in the evening today

Varun, will you sell the LiPoly battery of 1800 mAh, from Zippy as one..? if so tell me.. i need one battery at present.. 

Definitely you can get what ever quantity you want.

Plz Check your PM.

Varun..thanks for your great mind..will deposit money by tomorrow.. as you mentioned.. so, reserve one battery for me.. and i mailed you personally my address to you.. thank you..

One LiPo reserved for Mr. Roopkrishna,
thank you.

 Battery - ZIPPY Compact 1800mAh 3S 25C Lipo Pack
       These LiPos are really very slim and compact at the same time very efficient.
       Weight: 134g (including wire, plug & case)
       Dimensions: 106x17x34mm
       Balance Plug: JST-XH
       Discharge Plug: XT60
       
       Cost per piece - 900
       Quantity Available -'2'
       Shipping - 50

Mr roopeshkrishna , The battery is packed and ready to ship

thank you..

Status :

Motor    - Available 3
ESC      - Available 3
Servo    - Available 8
Balance Charger - Available 4
LiPo - Available 2 , 1 reserved for Mr. Roopeshkrishna

hi
i need a lipo and a charger for traxxas slash 4x4,just buyed a new one.its still in a stock condition,as i dont knw the lipo ur giving will work or nt,so plz confirm will it work,if nt which lipo will do,and tell me bout d charger also,will it charge all kind of batteries and in how much time.if ur stuff will b ok for my use then i need one charger and one lipo

wating for ur reply

thanks a lot 

The LiPos are working good...I have used them myself. The charger is also very good , we have been using it for 3 years...You can buy this set they both are really nice...Lemme know if you need them...Thanks for your interest..

as i allready told u tht i need the lipo,but i dont knw will it work with my slash 4x4,

Hi mkmkmk !

The LiPos which we have are of 1800mAh and 11.1V which is a 3 Cell battery.
I am uploading an image of the power specs of the Traxxas Slash 4 x 4. It depends on the skill level and the size of pinion and spur gear.
Hence It will work in your Slash 4 x 4 (Depending upon the gear set you have)just that it wont give you much juice , that is your run time will be less.
The Balance charger which we have is not a digital charger . It can charge 2cell and 3cell LiPo.

i understood wht u said thanks for ur explanation,my car is in stock condition till nw,nt a single thing has been change,i want a battery with run time atleast half an hour,and d charger for it should charge the battery within an hour,i knw thr r thing in market,but i dont hav ne idea,so as in start i atleast need 2s lipo/7.4v,,4000+Mah or 5000+Mah

 

these lipos will puff up if used in slash, coz each battery can safely kick out 45 amps , but ur slash will pull way more than that, so ur best option in this case would be to either buy other bigger packs or buy 2 batteries that varun is selling and connect them in parallel and then use it

Following stuff for sale :

1)   ESC - FLY PRO Seires 25A 2-4S Brushless Speed Control
      Cost per piece - 700
      Quantity Available - 3
      Shipping - 50

2)   Motor - 1000KV Outrunner Brushless Motors W/ Prop adapter Type A2212/13
      Dimensions:27.5x30 mm
      Shaft diameter: 3.17 mm
      Weight:47 g
      Thrust : 1200gms
     
      Cost per piece - 750
      Quantity Available - 3
      Shipping - 50
     

3)   Servo - CORONA 12.5g/ 2.5kg/ .14 sec Metal Gear Micro Servo
      Size:   22.5X11.5X24.6mm(0.88"x0.45"x0.96")
      Weight:   12.5g
      Operating voltage:   4.8V~6.0V
      Operating speed:   0.14sec/60º
      Stall torque:   2.5kg.cm
      Gear Material:   Metal
      Connector wire length:   215mm
      Temperature:   -20℃～+60℃

      Cost per piece - 450
      Quantity Available - 8
      Shipping - 50

4)   Charger - Turnigy 2S 3S Balance Charger. Direct 110/240v Input
      This charger is better then the iMax Pro according to my personal experience.
      got a full lot of 25 iMax Pro chargers which were not working.

      Cost per piece - 850
      Quantity Available - 4
      Shipping - 50

5)    Battery - ZIPPY Compact 1800mAh 3S 25C Lipo Pack
       These LiPos are really very slim and compact at the same time very efficient.
       Weight: 134g (including wire, plug & case)
       Dimensions: 106x17x34mm
       Balance Plug: JST-XH
       Discharge Plug: XT60
       
       Cost per piece - 900
       Quantity Available -2
       Shipping - 50

Hplz quote final price  of charger

Shauviks, Kindly check your PM inbox..

Hello Roopeshkrishna Sir !

Your battery has been shipped by DTDC.
Kindly check the attached receipt for tracking info.

Thank You

check ur pm