Align T-Rex 800e Trekker just arrived!!

Started by ImMAshiNe, March 15, 2017, 03:50:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ImMAshiNe

●Equipped with DFC flybarless main rotor system, the extreme low CG design effectively lowers aerodynamic resistance and improves flight stability characteristics.
●Carbon material integration technology is used in frame plate structure, resulting in simple maintenance and operation convenience. Poses both carbon and plastic material advantages, which supplements carbon material to achieve rigid and hard characteristics, not the traditional rigid but brittle characteristics.
●Frame has mounting location for the optional Align aerial gimbal system upgrade, which can be mounted without any modifications.
●Dedicated APS control unit and sensor unit mounting platform to simplify installation.
●Innovative sliding battery tray rails imbedded into 3K side frame, providing easy battery access and protection.
●Top mounted motor base, allowing blade drafts to cool the motor effectively.
●Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
●Utilizes high spec MOD1 112T CNC helical main gear and MOD 1 tail drive helical gear to increase gear mesh area, and minimize gear noise during flight.
●Top mounted ESC platform to take advantage of main blades airflow for effective cooling.
●New lightweight H-shaped electric device retention system for protection, as well as ergonomically correct design to simplify operation.
●Equipped with 750MX series high efficiency brushless motor, with ribbed case and fan to dramatically increase cooling effect, and improve overall power output.
●Brand new gear box with more streamlined design also allows for simpler disassembly.
●High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
●High torque rated one way bearing base.
●High precision bearing supported dual push point rudder control design.
●High speed rated thrust bearings incorporated into tail blade grips.
●Utilizes third bearing block on main shaft to improve frame's anti-torque rigidity.
●High grade painted fiberglass canopy with new 4 point anti-vibration mounting mechanism to simplify installation.
●New CNC aluminum alloy mounting plate.

Specification
● Length: 1490mm
● Height: 400mm
● Main Blade Length: 800mm
● Main Rotor Diameter: 1780mm
● Tail Rotor Diameter: 301mm
● Motor Drive Gear:13T
● Main Drive Gear:110T
● Autorotation Tail Drive Gear: 104T
● Tail Drive Gear: 22T
● Drive Gear Ratio: 1:8.46:4.73
● Weight(With Motor): 3516g
● Flying Weight: 5400g

Accessories:
●T-REX 800E DFC Kits Set x 1set
●3K Carbon Fiber Tail Boom x 1
●800 Carbon Fiber Blades x 1set
●750MX Brushless Motor(450KV) x 1
●3GX Flybarless system x 1
●BL700H High Voltage Brushless Servo x 3
●BL750H High Voltage Brushless Servo x 1
●Castle ICE2 HV 120 Brushless ESC x 1
●115mm 3K Carbon Fiber Tail Blades x 1set

Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●6S Li-Po 4500 ~ 5200mAh x 2
●2S Li-Po 1900 ~ 2300mAh x 1
●Dial Pitch Gauge

bijo


ImMAshiNe

Indeed if the price is worth it, you can buy smaller helis too, I have trex 470lp and 470lm too.

bijo


ImMAshiNe


bijo

do u have parts for T Rex 150, 250, 450D, 500, 550E, 600D, 700E, 700D

ImMAshiNe

Yup you can get all the parts for all of these, 15-25 days to arrive after you order.

bijo


ImMAshiNe

What about the question you asked last, weren't you happy with the answer? :- 8-)

bijo


junii jinx