Hey everyone! I'm selling all my RC and robotics stuff (that hasn't already been sold locally).
Reason for sale: Found another hobby! 

Here's the list:

1) 4 x DT 750 kv motors | tested once, excellent for quads and big planes| 
2000 for the complete set of 4

2) 1 x E-max CF-2822 BLDC + prop saver | used | 
400 total 

3) 2 x DYS brushless ESC 30A | used | 
500 each

4) 1 x 12V 12000 RPM brushed motor + 1000 V capacitor | used in hovercraft after proper break-in|
300

5) 2 x Turnigy brushed ESC 30A | tested once|
400 each

6) 3 x 7*6E props | in unopened packs |
100 total

7) 2 x 9V 8000 RPM brushed motors with props |used, excellent for mini hovercraft/ boat|
200 total

8] RCH Quad frame | unused |
500

--------- Robotics stuff ---------

9) 2 x 12V 200 RPM High Torque (32Kgcm) DC Geared Motor + homemade clamps |used|
http://robokits.co.in/shop/index.php?main_page=product_info&cPath=2&products_id=275
600 each

10) 500 Rpm side shaft motor + steel motor mounts | used |
600 total

NOTE :

1) Shipping extra.
2) 'total' means price for the set. The items won't be sold individually.
3) Please make orders above  500
4) Prices will be reduced for large orders.
5) All brushed motors have 1000V ceramic capacitors soldered on leads.

More pics...

And more...

4 x DT 750 kv motors
Book for me send me your bank details..

The pics have been re-sized and edited. The dt 750 motors are much bigger than they look in the pics. Same goes for the rest of the stuff.

Hey Satya! Booked the 4 x DT 750 kv motors for you!
They didn't come with nuts. I've added them. Also soldered bullet connectors on 2 of them...
Sending you bank details in a bit...

Quad frame dimensions pls.

Also please book the 3 7X6 E Props for me.

check PM

Booked quad frame for AEROVISHWA.

Booked props for VC sir.

After receiving your PM, I am sorry that I am not interested any more.

If satyagupta is not intrested book.. 4 X DT 750 for me

Faisal, I'll let you know at the earliest if Satya is not interested.

Vish, I'll send you the quad frame (wrapped in bubble-wrap) in a sturdy plastic box at the same cost we discussed! Hope you'll be able to make most out of it!

payment made.... u will recieve it  in short time...or by tomo morn.....

BTW where did u buy  the frame  from...and the dimensions..! any link will be better

Hey, I am shocked.

You have blessing with this hobby unlike other from GOD and it is proven. Please don't leave this hobby.

All we are waiting for your return.

The correct torque rating for the "200 RPM High Torque (32Kgcm) DC Geared Motor" would be around 10kgf-cm and they can be had for 500 bucks new from vegarobokit. I have used these motors so I just wanted to point out, hope the seller does not mind.

Quote from: AEROVISHWA on June 11, 2012, 11:06:03 PM
payment made.... u will recieve it  in short time...or by tomo morn.....

BTW where did u buy  the frame  from...and the dimensions..! any link will be better

Checked account at ATM twice this morning, didn't receive payment.

The frame's from rchobbyaddict.com (Anam). Here's the link:

http://www.rcindia.org/for-sale/(new-release)-quad-frame-rchobbyaddict-com/

Quote from: lastRites on June 12, 2012, 05:18:30 AM
The correct torque rating for the "200 RPM High Torque (32Kgcm) DC Geared Motor" would be around 10kgf-cm and they can be had for 500 bucks new from vegarobokit. I have used these motors so I just wanted to point out, hope the seller does not mind.

Thanks man, I don't like the prices of robokits.co.in either! Vegarobokits, too, is costlier as compared to some new shops.
I'll give them motors away to some juniors if nobody here buys them!

edit: Just checked the prices on a couple of sites, mostly 500. I'll drop the price to 400 each for those motors...

Quote from: KALYANPRODHAN on June 12, 2012, 03:44:23 AM
Hey, I am shocked.
You have blessing with this hobby unlike other from GOD and it is proven. Please don't leave this hobby.
All we are waiting for your return.

Thank you so much for your kind words, Kalyan da! 
This is just a temporary leave as I can't invest properly in the hobby right now! I'll surely be back the moment I start earning the big bucks! 
I'll still be visiting and posting on our RCI. There's so much to learn from and share with all the amazing people here! 

Swapnil you are my Mentor-in-Chief bro, its sad not seeing you around these days...busy in studies? 

Thanks so much Amit! How's your airplane build going?
Yes, I'm quite busy with studies and other stuff (  ) right now.
I've successfully built and flown an airplane...which was my childhood dream. So now my priorities have shifted a bit. I'm sure I'll be back with a bang here soon!

Swapnil, on the building front everything is going good, built 2nd scratch built plane which was slightly underpowered, crashed on maiden flight  , adding more powerful power setup in that. Got a GWS Slow Stick also from Lance. On the flying part still struggling, have not flown solo till now. But all in all I am enjoying. Looking forward to my first successful landing....  Hope to see you around ...and what is that other stuff.....   

I know this is a bit off topic but Swapnil can you please provide some more info on the "new shops" you mentioned please!
Thanks!

By new, I meant shops that came after robokits.co.in like robosoftsystems, nexrobotics, rhydolabz, embeddedmarket etc.

Item '1' sold and shipped to Satya.
Item '8' sold and shipped to Vish.

Cheers guys!   

Thanks buddy, track id??? and shipped using??

Satya, PMed you the details...

Robotics motors sold locally, only items 2, 3, 4, 5 and 6 left now!