mRo FLIGHT CONTROLLER + GPS + Developer bunddle

Started by ashvath100, October 26, 2021, 04:49:16 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ashvath100

Hello ,
purchased this on a trip abroad for a project but never got around to using it. selling to raise funds for a different project.
condition : box opened never used unsoltered unflashed. brand new .

bought from US at $222

Asking price : 14000 Rs

contact: 8056124717

https://store.mrobotics.io/ProductDetails.asp?ProductCode=M10022A

1 x SanDisk Ultra micro SD Card (8GB)
1 x USB Micro Cable
1 x MRC0253 150mm USB Micro to [4 Pins JST-GH]
2 x MRC0206 150mm for GPS/Telemetry Radios
1 x MRC0205 100mm [4 Pins JST-GH] cable for I2C Accessories
1 x MRC0250 150mm X2.1 for Safety Switch and Status LED
1 x MRC0251 100mm X2.1 for Power module
1 x MRC0252 150mm X2.1 for Buzzer
1 x MRC0221 150mm [4 Pins JST-GH] to [4 2.54mm Female Headers] for programming
2 x MRC0202 150mm [6 Pins JST-GH] to [6 2.54mm Female Headers] for multiple solutions
1 x Servo connector to Spektrum Satelite


Microprocessor:
32-bit STM32F777 Cortex M4 core with FPU
216 MHz/512 KB RAM/2 MB Flash
32 bit STM32F103 failsafe co-processor
Sensors:
Invensense ICM-20602 3-axis accelerometer/gyroscope
Invensense MPU-9250 3-axis accelerometer/gyroscope/magnetometer
MEAS MS5611 barometer
Interfaces:
5x UART (serial ports), 2x with HW flow control.
1x CAN
Spektrum DSM / DSM2 / DSM-X® Satellite compatible input up to DX8 (DX9 and above not supported)
Futaba S.BUS® compatible input and output
PPM sum signal
RSSI (PWM or voltage) input
I2C® (Via GPS port)
SPI
2 x ADC inputs
Externally mounted microUSB port

ashvath100