Beware of dealing with these people

Started by sushil_anand, December 24, 2010, 12:14:37 PM

Previous topic - Next topic

0 Members and 7 Guests are viewing this topic.

Rooster

I have dealt multiple times with Sandeep, although have not met him. And my experience has been good transacting with him and would continue to do so.He has always kept up his words be it the condition of the item or the payment made.I think the incident in discussion here should not have been posted under this thread since it is just an argument or maybe just a bad day these guys were having.
Let the two guys resolve this difference of opinion rather than all of us trying it. Probably this matter needs just a phone call between the two.

Shreekant

rcpilotacro

Quote from: srivatsa on August 25, 2012, 11:59:42 AM
misbehave !!! Isn't that word an over kill?

Quote from: sbajare on August 24, 2012, 02:39:29 PM
I did not like the attitude of this boy and hence i made it clear that he was not keen on learning but rather wanted a beautiful girl to play around and not a model to learn.

..And on top a fool who does not kknow the ABC of Aeromodelling goes out on the forum and starts writing against me.

...this is the stupidest guy i have met and i feel like laughing.


irrespective of whatever happened, calling somebody Fool and Stupid is not misbehavior  then what is it ? care educate.
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

srivatsa


Sil

It is sad to see members sitting in judgement and bullying others on the forum. A student wants to learn aeromodeling and the first thing he does is slander a senior aeromodeler and instructor to whom he has not paid a single paisa. These distasteful comments should be removed, I am posting here because I am not sure if my report to the moderator has functioned.

rcpilotacro

Himanshu

(a) it is apparent that phone calls are flying

(b) be that as it may, like i said irrespective whatever happened if YOU were to called a FOOL and STUPID on the forum, would you take lying down ? or will you take Mr Bajare to court and file a defamation suit (Which is coming his way anyways) or will you KISS him because he is senior RC member, come off it Sil,

(c) Make me see reason, i will render public, unconditional apology, without doubt to all including our man Vigyani
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

VC

#105
Damn right these are distasteful comments. A 'senior' aeromodeller tries to palm off a beat up/used/second hand aircraft to a novice/student. When the novice disagrees, he is called "stupid" and "fool" in an open public forum. Thereafter he is threatened with a police case. Distasteful behaviour to say the least. I hope the person in question realises the dangers involved in 'character defamation and use of abusive language meant to demean a person's character in print'.

Come on, give me a break.

Students who have scant idea of aeromodelling or RC are bound to have high expectations. The so called 'instructor' has to have a lot of patience while dealing with them. That is what 'Training' is all about. Patience, Understanding,the Ability to Listen and the Desire to make your Trainee's life easier. Trust me on this, I may not be a 'pure' aeromodeller, however, I train manpower for a living and have been doing so for the last 25 years.

Please let this topic slide without adding any more fuel to the fire. Let the concerned parties sort it out themselves. There is no point in any further show of support and solidarity - covert or otherwise.
Growing old is mandatory, growing up is optional!

satyagupta

Quote from: VC on August 25, 2012, 07:37:05 PMThat is what 'Training' is all about. Patience
{:)} {:)} {:)}
An instructor/trainer/teacher need to have patience with novice/beginner
one stop for multirotor needs:
www.quadkopters.com

http://www.facebook.com/QuadKopters
https://www.youtube.com/user/QuadKopters
https://www.instagram.com/quadkopters

himank

Quote from: Sil on August 25, 2012, 07:14:53 PM
It is sad to see members sitting in judgement and bullying others on the forum. A student wants to learn aeromodeling and the first thing he does is slander a senior aeromodeler and instructor to whom he has not paid a single paisa. These distasteful comments should be removed, I am posting here because I am not sure if my report to the moderator has functioned.

What senior are you talking about??
Senior in playing with a TOY, thats it..!!
He's neither  a Nobel Prize winner nor a soical activist, not even a elderly man...He can play with his toy better than the other guy could , that doesnt make him a King of anything!

Sil

No need of any phone calls I am mature enough to make my own judgments.
Sandeep may have been born over a decade after I built my first aeromodel but as he is the local instructor here I give him due respect and always pay for services rendered by him in the field. Things do not come free even if I am a pensioner.
I am aware that some of you are instructors in your field and so have I been in my field for long. I think at least one of you may be an ex-NDA so to you I say, as a young Captain I was an instructor at NDA in 1978, when a cadet came with a genuine query it was answered but if the intentions were otherwise the response also varied. Apparently now a teacher has just become a paid service provider who can be insulted at will.
What LHS are some members talking about? It is just a Local Hobby Shed that belongs to an aeromodeler (me) which has been made available to others (free) to use as a store and workshop just to help out the hobby. So kindly stop applying the Consumer Act and saying Consumer is the King (without paying a paisa) so you can pick up anything you want at the price you want. I get worried because my paraglider trike is also there. If I was around I would have told this King to leave because I am the Emperor of that private property.
I prefer being on the sideline this is only the second time that I have interfered on this forum. The first time was when a lot of lose comments were made by members on paragliding at Hadapsar when most of them were clueless about the sport. Regards, Col HK Sil (Retd.)  :salute:

rcpilotacro

#109
Sir
Good to hear your true identity and i wasn't aware of the same, i detest doing it to anyone and i am more than certain you do agree with me. i can see Sandeep is your friend, if Sandeep and I had met he could have been mine too, even if he was/is a friend, i will do a dis service to him and the friendship if i dont tell him, he cant call names to anyone, King, Emperor or Pauper alike.

your take ?
EDIT
Spelling
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

hyd_quads

Bad experience with Dhiraj Rahul of www.projectstuff.in

I was searching for JST-XH 3s Wire extension which is a hard-to-find part out of HK. I found it on www.projectstuff.in
I ordered it and transferred the money the next day.

1. After exactly 3 days of the money getting transferred, I called him (for the first time) and asked about my order. He said it was being "processed". Wonder what he meant by that.
2. After 5 days I called him again and he said my order had been packed would be dispatched the next day.
3. I get a mail on day 7 which says that his consignment had gotten 'stuck' at Mumbai Intl airport and that it would take some 30 days to process it.

A. Why wasn't I informed that it wasn't in stock? (his site clearly says "In Stock")
B. Why should customs clearance take 30 days? Is he yet to order what I ordered?

And in addition to all this, his communication was VERY poor.


ujjwaana

Quote from: hyd_quads on October 10, 2012, 04:09:00 PM
Bad experience with Dhiraj Rahul of www.projectstuff.in

I was searching for JST-XH 3s Wire extension which is a hard-to-find part out of HK. I found it on www.projectstuff.in

JST-XH cables are called 'RMC' connectors in India and are sold Rs 5 /3 pin , Rs 6/4pin ans so on with 10 inch pig tail cables attached in the local Bangalore Electronic market.
I bet if you take a Lipo with JST-XH connector to Gujrati Gali near Koti, you would definitely find the same there
Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother

ujjwaana

Quote from: hyd_quads on October 10, 2012, 04:09:00 PM
Bad experience with Dhiraj Rahul of www.projectstuff.in


The Address of the Store is :
Address:
Project Stuff
Owner Name - Dhiraj Rahul
Address - 219, F - Hostel , NITC Hostels
City - Calicut
Pin - 673601
Country - India
Mobile No. - 7277684044, 9037525455

Earnestly, I would stay away from such stores, run from hostel dorms, unless one builds a rapport. Nothing against the bright students of this country, but myself hailing from a prestigious campus, I know the different 'Work' commitment one has to attend to in college campus. India is never known for companies starting from Garages anyway.
Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother

hyd_quads

Hmm, so you're familiar with this gujrati galli.
Anyways, thanks a TON for the advice, I didn't know that. I'll try. :)

romanxdsouza

#114
http://www.rcelectronicworld.co.cc/p/material-sources.html   this guy dhiraj rajendra jadhao is a cheat,i ordered for 5 sheets of depron was charged 1400rs,from pune - mumbai recieved it in pieces ,,he said he will send new sheets its been 2 months now i have not recieved it,he doesnt answer his phone even,guys from mumbai here a good place to buy  heres the adress...abdullatif habibbhoy 196 abdul rehman street,400 003 tel 23425314..........per sheet 60rs thats 6mm sheet around  72inch x 26inch you can  call and ask exact size and home deliver...etc
----------------

[Admin Note] Reference to this For Sale thread : http://www.rcindia.org/for-sale/white-depron-foam-available-for-sale-10937/msg120517/#msg120517

1firefly2

I should write up my experience. I have not bought anything from them but still people should be aware.
I went to Tritech Hobbies in Mumbai to purchase Savage Flux. The people there seemed very less interested.
Then they told me that they will order one. After 1 month I asked about the status & they said that it has arrived in 'Bangalore' & all custom clearance has been done. Even after a month, it never arrived. Then they said that they cannot procure it due to 'US Dollar' rise!
After that I went to their place & they informed me that many people are loosing interest in this hobby  :o
I never paid anything to them but man, a great ambassadorship for R/c.

After that I talked to Mr. Rahul Mohan & he was such a nice guy. I suggest any potential buyer to better buy from him even if you are not in Delhi.  :(

mail4ajo

#116
[Admin Note] Unnecessary "Quote" removed... use "Reply" instead... See usage guidelines : http://www.rcindia.org/rc-india-forum/forum-usage-tips/

Be advised that HPI is on a low key in India. They do not have stock of any item in a while. I have ordered cars for college students directly from Tower since HPI is not being imported now.
*Mugen Seiki MBX7 with Novarossi P5 engine*
*Mugen Seiki MBX6T M-Spec with Novarossi P5 engine*
*Mugen MBX6 Eco with Mamba Monster 2200kv*
*HPI Mini Recon with BL system*
*Team Losi 1/24 rally*
*Team Associated RC8 onroad GT Car, Team Orion power system coming soon...
*Hobbyking 1/18 Rally Extreme BL*
*Sanwa MT-4 radio*
Previously owned - Mugen Seiki MBX6 M-Spec, Thunder Tiger MTA4 S50, ST-1, Sparrowhawk XB, HPI BAJA 5Bss, TRAXXAS REVO 3.3

1firefly2

#117
Ok. But even if thats the case, People should not misguide newcomers. I will never do that & will make sure that it becomes a knowledge gaining & passionate experience to beginners. And for HPI case, let me tell you guyz that after all this I asked for Losi LST XXL so that, I could convert it to electric...But again some excuses were delivered.

rcpilotacro

#118
http://www.rcindia.org/for-sale/easy-star-1-for-sale/

sumitnathwani

wait could be months before you get what you bought, take a clear commitment before you buy

also

see this

http://www.rcindia.org/for-sale/easy-star-1-for-sale/msg155488/#msg155488
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

sundaram

I was just about to. Thanks Gusty for already doing it.

"Sumitnathwani" one more added to Beware list.

sumitnathwani

Thank you cutie... Happy? Cho chweet... Enjoy

sanjayrai55


Rahulvyas

OMG, is this guy ok?   dosnt even realize his mistake!
-2814 700kv Carbon Fiber 685mm Quadcopter ( tuning PIDs)
-Scratch build Hexacopter ( selling the parts) { almost sold}
-9xR - The best RADIO
-ST360quad (sold)
-kk2 (sold)

Student

aniket210696

.

muradshak