Brand New Saito FG36 cc 4 stroke petrol engine

Started by theaviator, August 22, 2009, 10:25:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

theaviator

I have here a brand new Saito FG36cc 4 stroke gas engine. This is brand new in box and has never been installed/removed from its original packaging.

I bought this without checking the dimensions as I intended to install this on a 74" ME109. The engine mount rails are built in to the cowl and there is no way to install this engine as it is slightly broader than needed and will definitely be way too over powered.

This engine replaces traditional 50cc engines as this produces the same power as an OS BGX1/Moki 2.10 etc.

Anyway, here are the manufacturer's specs:

FG-36 (220G) with Muffler/Ignition/MM: AK

Key Features

4-stroke gas engine from one of RC's top brands
36cc displacement rivals similarly sized 2-strokes
Includes ignition, muffler, Walbro carb and engine mount
Built for the utmost in reliability and performance
Brings Saito experience to gas enthusiasts
Comparable in power to Saito FA-220 glow 4-stroke
Available in traditional silver case

Specs:

Type:4-stroke gasoline engine
Displacement:2.20 cu in (36cc)
Bore:35mm (1.49 in)
Stroke:32mm (1.26 in)
Cylinders:Single
Total Weight:61.6 oz (1746 g) motor, mount, muffler, and ignition
Engine (Only) Weight:49.0 oz (1389 g)
Muffler Weight:3.0 oz (86 g)
Crankshaft Threads:8 x 1.25mm (Step up is 10mm)
Benchmark Prop:APC 18 x 6W @ 8,300 rpm
Prop Range:18-19 in x 8-9 in ; 20 x 8 in (Bolly or Mejzlik)
RPM Range:1,700 to 9,000
Fuel:Gas oil mix of 20:1 (20:1 is recommended for break in and continuous operation).
Mounting Dimensions:7 x 2 5/8 x 6 5/16 in (124 x 85 x 173mm)
Muffler Type:Cast
HP:3.5
Cylinder Type:Ringed
Starting System:Saito ignition 4.8 - 6V (capacity more than 1,000mAh)
Carb Type:Walbro/Saito
Crank Type:Ball bearing

For more information, feel fre to call me on +91-98209 58882

Due to the size of the pictures, I'm not able to upload the pictures, so if you would like to see the engine before you buy it, please email me and I'll be happy to send you pictures.

Akshay

anwar

Quote from: theaviator on August 22, 2009, 10:25:33 PM
Due to the size of the pictures, I'm not able to upload the pictures

Please use http://www.webresizer.com to make the images manageable in size.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

theaviator

Thanks for the information. Will do so next time.

Regards

Sahevaan

could you pls mention the cost.....
happy flying ,
sahevaan

theaviator

Hi,

Sorry, I thought I put that there.

Anyway, I paid $749.99/- I'm willing to sell it for Rs.36,260/- including shipping.

Regards