Main Menu

CLEARANCE SALE SUNDARAM

Started by sundaram, September 03, 2014, 09:16:49 AM

Previous topic - Next topic

0 Members and 5 Guests are viewing this topic.

bhanu

absolutely right sir, lcd bacpac is received in brand new condition. :thanks:


manojswizera

Received the spinners and cell holder, in excellent condition.
Thanks a lot sir for the free bee.

Sundaram sir, the foam which you used for packing chunks is Depron or Biofoam ?
Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.

sundaram

Re:
#302
It's biofoam indian origin.  But both depron and bio foam are same. Only density might vary slightly. Thanks for confirming Manoj.

pravesh736

Hi Sir, I have recieved my parcel in excellent condition and packaging. Thank you. :)

sundaram

Thanks for confirming Pravesh.

sundaram

Money recd from Sky-Surfer@Ramesh for the FlySky FS T-6 Radio Set.

Will be shipped and POD updated.


sundaram

#306
Packages going out today.

Ashok - HD wing cam 1 and 02 pairs of 12x4.5" quad plastic props.  India Post Registered Parcel CP109421595IN
Ramesh - Flysky radio and receiver set.  DTDC Z33374637

Apologies to Ashok for the extreme delay. Just that 02 pairs of 12" plastic props made it a real tough job finding the right container for packaging as the props getting bent in transit was unacceptable. ultimately had to make one address given is a non speed post pin so had to send by Registered Post parcel.

DTDC is getting damn expensive.

sundaram

#307
Absolutely brand new in its original packing Assan Gunther 8 2.4GHz FASST Compatible 8CH S.BUS Receiver 06 Nos Rs 2100 Each including shipping.   additional receiver only Rs 2000/- each and  All six Rs 11700/- including shipping.

https://www.hobbyking.com/hobbyking/store/__39874__Assan_Gunther_8_2_4GHz_FASST_Compatible_8CH_S_BUS_Receiver.html

Features:
• Compatible with Futaba 2.4GHz FASST transmitters and modules
• Full range receiver with dual antenna diversity
• Eight standard channels
RSSI and S.BUS output
• Two Gunther 8 receivers can be used together as an 18CH receiver combo
• Supports both normal and high speed modes for CH1~CH6
• Failsafe functionality

Specs:
Input voltage: 3.7~8.4V
Dimensions: 47x30x10.8mm
Weight: 12.8g

Very good receiver where RSSI is required and when more than 8 Channel is required to be used for additional Gimbal/camera control  operations.



sundaram

Items still left are updated below.
All Brand New

http://www.hobbyking.com/hobbyking/store/__24928__B20_30_15L_FIN_Brushless_Inrunner_Motor_6320kv.html
Blue in colour.

Inrunner 2030 6320KV recomended for micro car/Heli application Rs 600 including shipping

http://www.hobbyking.com/hobbyking/store/__19109__turnigy_sk3_fandrive_3516_3300kv_70mm_edf_.html

Out runner 3516 3300KV for an 70mmEDF can support Lipo 3S and 4S and 800 watts of power. Rs 1300/- including shipping

One more Inrunner Turnigy B3640-3900 Supports 3S and 4S 400 Watts If you want to make a Funjet a missile with a 6x5 / 5x5 Prop. Not sold any where as of now Rs 1000/- Including shipping.



For Sale Brand New GoPro Hero 3 Wifi Remote 02 Nos with all accessories and charging cable Price Reduced Rs 3000 each including shipping. Reason for selling since they are lying with me spare unused for some time. I don't see myself using them.

Absolutely brand New Dave Browns Engine mount for a 0.09 to 0.11 Size Glow engines with rail mount Rs 200 including shipping.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXB868

Rail mount for COX Engine Tee Dee type Engine 0.049 to 0.09 Rs 300 Including shipping.

http://www.hobbyking.com/hobbyking/store/__45415__Cox_049_Tee_Dee_Engine_Mount.html


sky_surfer

Received the Radio, in excellent condition.
Thanks a lot sir.

sundaram

Thanks for confirming Ramesh.

sundaram

V2 Eagle @ Ashok I am really regretting this. Any updates recd the package yet or not.

Detailed Track Events for :  CP109421595IN   ( RP )
Date   Time   Status at   Status
09/10/2014   13:58:03   JALANDHAR CANTT HO   Article Booked
09/10/2014   16:15:41   JALANDHAR CANTT HO   Article Bagged to PH JALANDHAR
10/10/2014   08:30:46   PH JALANDHAR   Bag is Received
10/10/2014   08:32:38   PH JALANDHAR   Bag is Opened
10/10/2014   12:33:18   PH JALANDHAR   Article Bagged to PH CHENGALPATTU RMS
13/10/2014   19:23:45   PH CHENNAI   Article Bagged to MADAMBAKKAM
14/10/2014   09:45:12   MADAMBAKKAM   Bag is Received
14/10/2014   09:49:18   MADAMBAKKAM   Bag is Opened.

No updates thereon

v2 eagle

Not received yet, hopefully it might be delivered on SAT(Today/tomorrow) just like all the other packages that i receive on Saturdays.
I think there is no need to worry, giving the frequent rain in chennai for the past 2 days. Finger closed !!!

Ashok.P
FPV with head goggles

http://ashokpkumar.wix.com/mysite

miginstruments

Sir is the wireless simulator still for sale. I am interested in it.

sundaram

#314
Sold longtime. What's left and new added is updated in the last few posts.

v2 eagle

Received the packet sir after a long fight over the phone with the chennai postal guys.
Should say the packaging is awesome. never expected such a huge parcel with lot of foam padding for these stuffs.
A big thanks for these stuffs.(Knew that this big packaging would surely costed you a fortune to ship.!!)
Happy diwali to you and your family Colonel!!
Ashok.P
FPV with head goggles

http://ashokpkumar.wix.com/mysite

sundaram

Thanks for confirming Ashok, That was a relief that you have received the package safe. I wanted to send it using Speed post but since it was not Speed post pin I had to send it by Registered parcel which was not much though. Sorry for the delay again. However why was the fight with Postal guys? may be due to delay?

Happy Diwali to you and family too.

v2 eagle

Called the post master section and they first said they have no such parcel at all,
then another guy said its delivered already, and another guy picked up the phone and said he will get back in minute, and i have to say that im a college guy who needs this for my projects and its already getting lade. and all of a sudden it arrived at my home by 5PM which is unusual. seems like they forget it at all.!!! either way, all is well that ends well. the pic quality is enough for me to begin with. more like a starter for serious FPV. getting hold of the controls seems to be a mighty task. figured out almost all except how to connect it to my PC to transfer data. is there any trick to do that. my PC doesnt detect it at all. but charges perfectly fine.
read in a forum that we need to switch it off before connecting and turn it on later. did that too and still its not recognizing.
Any thoughts?

Ashok.P
FPV with head goggles

http://ashokpkumar.wix.com/mysite

sundaram

#318
When connected in USB it always is in USB drive  mode you cannot use in any other function. If the USB drive detects a pen drive it will detect this camera too as USB drive. Try changing another USB port.  Use directly on computer do not use multi port. Which operating system you are  using?.

The video out cable gives very low resolution out. However the recording is in good resolution.

You should not connect to USB in switched on condition. You should always switch on later.

v2 eagle

Will try tomorrow and post results sir.

Ashok.P
FPV with head goggles

http://ashokpkumar.wix.com/mysite

Capt Vish

Do you still have any radio systems for sale Mr Sundaram?

sundaram

All of my spare radios have been sold out. Sorry  :)

Himadri Roy

For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv

rastsaurabh

Update please if anything is left ???

sundaram

#324
@ Saurabh Gopro remotes, three brushless motors, Assan Receivers four numbers, 1/2 A engine mounts are still left.

@ Himadri no FPV stuff left for now.